User manual KORG X-911 SERVICE MANUAL

[. . . ] Complete the first section now, so that you can become familiar with the main features, and get comfortable with navigation. You'll find the well-designed top panel, TouchView display and dedicated knobs around the display make working with the X-911 a breeze!Transport controls shown as follows: [ ] = RECORD [ ] = PLAY [ ] = STOP [ ] = REWIND [ ] = FAST FORWARD First, connect the AC power cable. Make sure that the MONITOR LEVEL knob or HEADPHONE level knob is turned down first, and then connect audio cables from the MONITOR OUT L/R jacks on the rear panel of the unit to your stereo powered monitor system (or connect headphones to the PHONES jack on the front panel). [. . . ] Push faders 1-8 and the MASTER fader all the way up then all the way back down. When the song is played back you will see the on screen faders return to their settings stored in the scene. Press the [ ] key and watch the display. 3 X-911 EasyStart Creating and deleting Scenes: 1. Press the [ ] key and let the song playback for about 10 seconds then press [ ]. Make some dramatic adjustments to faders 1-8 and the MASTER fader. Press the [STORE] key, then press the [SCENE] key. Rename it by pressing "Scene_002" in the display then press the "Rename" button in the display. (You can pick from a list as well) Name it and press "OK'. Playback the song from the beginning to hear the result. You can make changes to a scene by making the desired adjustments and pressing "OverWrite" in the display. The changes are applied to the currently active scene. (Press [<] [MARK JUMP] to return to the beginning of the song when it ends) Press the [CH VIEW] key press the SEND INTERNAL [1] key located in the top right hand corner of the adjustable display rotate the SEND knob right, to add more reverb, or rotate left for less. You can view the send level amount updated in the display (Send E1). You can make EQ adjustments by using the dedicated EQ controls to the right of the display. To select EQ presets, press [MIXER] select "EQ/ATT/PHASE" press the "EQ Library" tab. 2. 3. 4. 5. [MIXER] All mixer settings instantly accessible!Here you will find access to input/output assignment, pairing faders, scene automation, the analog compressors, EQ, effect sends etc. 4 X-911 EasyStart [TEMPO] Tempo, Time signature and Rhythm There are 265 preset metronome / rhythm patterns in the X-911. These patterns can be used to create a drum track or Tempo Map with pattern, tempo and time signature changes. The Rhythm Patterns /Tempo Maps that you build do not use actual tracks, but can be recorded to tracks if desired. (See the X-911 Owner's Manual page 61) 1. Press the [TEMPO] Key, and then press the "Prev))" (Preview) button in the display. Press the " " popup button in the lower left of the display (Metro04 L1 is currently selected). Audition some of the patterns by pressing to select them in the display, and by using the <scroll bar> or the DIAL. [. . . ] When finished, press ] Press the [METER] key (lower left corner of the display) press the [ ] button (it will blink red), and then press the [ button to start recording when finished recording, press [ ] and then press [<] [MARK JUMP] to return to the beginning of the song. Press the red [REC/PLAY] key for Channel 1 so that it changes to green, and then press the [ track. 4. ] button to playback the If you want to overdub another part, repeat the steps, starting with the "Assign an input" section, only this time use Channel 2. (See the X-911 Owner's Manual pages 61-64 for more on the Metronome, Rhythm patterns and Tempo Maps) 6 X-911 EasyStart Mixdown and master your song: The X-911 has a dedicated stereo Master Track for boucing and mixing. The Master Track contains eight virtual tracks, allowing you to record eight different virtual mixes and pick your favorite for burning to CD. [. . . ]