Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KRESS 450 BS. We hope that this KRESS 450 BS user guide will be useful to you.
Lastmanuals help download the user guide KRESS 450 BS.
Detailed instructions for use are in the User's Guide.
[. . . ] To release the continuous operation merely depress the switch, which makes the holding button spring back automatically. This machine is fitted with a full-wave switch. Ensure that the drill is not allowed to jam for longer than 2 - 3 seconds. Longer jamming can lead to motor damage. [. . . ] remounting takes place in the reverse order. Clean the flat surfaces on the drill chuck and spindle before mounting. Screw on the drill chuck firmly and secure with the safety screw. Observe in addition that, when using a rim gear drill chuck, the chuck key must not be attached to the machine with chains, cords or similar means. When drilling or screwdriving, secure the work pieces against being rotated by the drill. Our service personnel will do this and all other servicing work fast and professionally. As the result of a innovative mains cable module 4, this is possible in a quick and easy manner. Press the latches 3 on both sides and pull the mains cable module out of the handle. insert a new mains cable in the handle and latch. Mains cables in various lengths are available as special accessories. Use the mains cable module provided only for Kress Electro-Tools. Do not attempt to operate other machines with the module. Make sure that the bit and screw correspond in size and shape. It is advisable to use socket-head screws since their self-centering action ensures safe work. or even better - TORX screws and the corresponding bits. Optimal screwing is achieved when the screwing device is fixed securely in the screw head. Always make sure that the chosen speed is correct for the purpose for which you are using the machine. high speeds are necessary for polishing and grinding. When drilling match speed with type of material and drill. High speed drilling in steel and stone will cause premature tool wear. [. . . ] We reserve the right to repair defective parts or replace them with new parts. Improper use or handling as well as opening of the machine by unauthorised repair agencies voids the guarantee. Parts subject to wear are excluded from the guarantee. The guarantee may only be enforced when defects are reported without undue delay (including shipping damage). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KRESS 450 BS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KRESS 450 BS will begin.
