Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KRESS KSV 200. We hope that this KRESS KSV 200 user guide will be useful to you.
Lastmanuals help download the user guide KRESS KSV 200.
Detailed instructions for use are in the User's Guide.
[. . . ] Remove splitting wedge (12), splitting wedge adapter (17) and plain washer after loosening the Allen screw (16). Please wear gloves for all of the following procedures!Remove chain guard from the chain saw attachment. Pull blade guard (15) back to fully open position and hold. [. . . ] Insure suffcient lubrication: before every second cut push the oil pump button to pump extra oil into the guide groove in addition to force-feed lubrication. During this time , check the chain tension regularly. Before doing so, turn the machine off and pull the power cord! Only after this thirty minute period should you use the machine for more difficult cuts and greater cutting depths. The load on the chain pinion is especially great. Never use waste oil the impurities in the oil would become deposited in the lubrication channels and lead to blockages. We recomend the use of standard chain lubrication oils whose consistency has been especially developed for use in chain saws. Do not continue sawing if the oil level in the tank falls below the minimum mark (26). Clean the oil fill spout thoroughly every time before adding more oil. This prevents saw dust from getting into the tank and causing blockage of the oil feed. Do not fill the tank above the maximum mark. To fill the tank, press in the knob (2) of the oil pump and turn to the right until the arrows on the tank and the knob match up. The knob remains down and blocks the oil feed. Open the oil feed before beginning operation!Turn knob (2) to the left until the arrows on the tank and the knob match up and the knob pops up. In this position, oil flows constantly into the chain guide, even when not in use. The advantage of constant lubrication: The initial friction of the chain saw is less and the life of the saw is prolonged. Please close the tank when the machine is not in use (to protect the environment)!Oil can cause serious pollution and containation of ground water! Never forget to open the tank before you saw! [. . . ] Push the bar with the chain toward the chain pinion (24) until the saw chain can be removed from the chain pinion. Now the bar and the chain together can be pulled out between the transparent safety shield and the chain pinion. When installing a new chain on the chain guide, please note the rotational direction of the saw chain. The cutting edges must face in the direction of rotation, as indicated by the symbol on the transparent safety shield. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KRESS KSV 200
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KRESS KSV 200 will begin.
