Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KRESS SBLR 2362. We hope that this KRESS SBLR 2362 user guide will be useful to you.
Lastmanuals help download the user guide KRESS SBLR 2362.
Detailed instructions for use are in the User's Guide.
[. . . ] switch-over by means of the sliding switch (4). Percussion drilling device The machine has an integrated percussion mechanism and can be switched from normal drilling to percussion drilling. The sliding switch (4) allows switching from normal drilling to percussion drilling or vice-versa while the machine is in operation. [. . . ] When turning anticlockwise, it is possible that the chuck loosens itself from the spindle. For this reason make sure that the chuck sits properly on the spindle. Operating the quick-change chuck This chuck has been developed especially for use with percussion drills. The chuck has a release safety lock which prevents any unintentional release of the drilling tool even at high impact frequencies. After attaching the jaw chuck to the tool, a slightly higher torque must be used to engage the clamping force safety lock. The torsion angle of the collar must be approximately 50° during the locking procedure. After this has been completed, the tool can be tensioned as usual. Turn the collar firmly in the "ZU" direction until a click is heard. The drill is only properly tensioned when the collar has been turned as far as possible and no more clicking is heard. Always make sure that the chosen speed is correct for the purpose for which you are using the machine. high speeds are necessary for polishing and grinding. When drilling match speed with type of material and drill. High speed drilling in steel and stone will cause premature tool wear. Use tool steel twist drills for soft materials such as wood and plastics; carbide-tipped stone drills for stone and concrete; high speed twist drills for steel and iron. Also make sure that, using a gear-rim-chuck, the drill chuck key is never fastened to the drill with chains, strings or by similar means. Be sure that the workpiece cannot be taken along by the drill. maintenance The machine's motor has life-time lubrication and requires no special maintenance. However, should you operate the machine on a continuous basis over long periods of time we recommend that you send us the machine for thorough This will spare you unnecessary repair expenses and increase the machine's service life. [. . . ] The guarantee will be rendered void if the device is used improperly, mistreated or opened up by unauthorised repair personnel. Parts which are subject to wear are not covered by the guarantee. The guarantee may only be enforced when defects are reported without undue delay (including shipping damage). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KRESS SBLR 2362
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KRESS SBLR 2362 will begin.
