Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KRESS WTS 900 E. We hope that this KRESS WTS 900 E user guide will be useful to you.
Lastmanuals help download the user guide KRESS WTS 900 E.
Detailed instructions for use are in the User's Guide.
[. . . ] Pay attention to the direction of rotation: Always hold the machine such that the grinding dust or sparks fly away from the body. Be careful if persons or objects are standing nearby. Inflammable material must not be kept in the vicinity. Check the working area with a metal detector in order to avoid damaging any concealed electrical leads, or water and gas pipes. [. . . ] Angle Grinder Article number Input power Output power No-load speed Speed under load Grinding discs Ø Cutting depth max. Before any work on the machine itself, pull the mains plug! assembling the auxiliary handle Place the clamping strap around the gearhead and insert it in the openings on the clamping part of the auxiliary handle. The auxiliary handle is locked by turning it clockwise. The auxiliary handle can be turned to the required position. By turning the auxiliary handle clockwise, it is locked again. English Putting into Operation Check before putting into operation that the mains voltage agrees with the voltage specified on the nameplate of the machine. Before any work on the machine itself, pull the mains plug!For disassembling the protective guard 4, remove the 2 screws and take off the counterflange. To lock, push the On/Off switch 1 forwards fully. By pressing the projecting front edge of the On/Off switch 1, it returns to its initial position. Before any work on the machine itself, pull the mains plug!Only cut and grind when the protective guard is mounted!It must be possible to move the grinding tools slightly, but they should not sit too loosely on the spindle. The starting current limiter reduces the starting current. The motor slowly runs up to no-load speed, thereby protecting the user and the gearing and prolonging the life of the machine. Full power is then available and the machine turns at the maximum possible speed. When the load is reduced, the voltage drops again and the sound level for the user is reduced. The bore on the roughing/cutting disc 5 must fit on the clamping flange 6 without any tolerance. It is not permissible to use adapters or reducers. [. . . ] We reserve the right to repair defective parts or replace them with new parts. Improper use or handling as well as opening of the machine by unauthorised repair agencies voids the guarantee. Parts subject to wear are excluded from the guarantee. The guarantee may only be enforced when defects are reported without undue delay (including shipping damage). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KRESS WTS 900 E
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KRESS WTS 900 E will begin.
