User manual KRUPS 868

[. . . ] . , CI«OOl1D~ Instruction BooklWarranty/KRUPS Guarantee of Performance IL Futuro, Jr. (m~del#868) ~ WID ~ ~ kRUPS lTIin. rnaJC. 0 l:-J I IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, to reduce the risk of fire, electric shock, and/or injury to persons, including the following: . Read all instructions and information in this instruction book and any other literature included in this carton referring to this product before operating or using this appliance. To protect against fire, electric shock and personal injury do not immerse cord, plugs, or appliance in water or other liquid. [. . . ] Usingthe measuring container (k), fillthe boiler container withfresh, cold water (see figure 5). NOTE (8-(8 - D' -0'+ (8- = the = the quantity of water required to steam/froth milk for cappuccino quantity of water required to make 1 cup of espresso = the quantity of water required to make 1 cup of espresso and steam/froth milkfor cappuccino -0'0' - =the quantity of water required to make 2 cups of espresso cappuccino ~ 0' + C8 = the quantity of water required to make 2 cups of espresso and steam/froth milkfor CAUTION . Neverilltheboilerwhileyour f "IL Futuro, Jr. " is switched "ON". Follow the measurements " , ;. NOTE: You may want to add a little extra water (approx. 1/4 cup) to compensate for evaporation and absorption during the brewing process. OF WATER. ) The measuring container (k) has markings on it to 'meet all your measuring needs. Place the boiler cap (b) on the machine and turn it clockwise until it is secure (see figure 6). ATTENTION Make sure that the overflow grid (i) is in place. To make espresso place either an espresso cup or a cappuccino cup directly underneath filter holder (t). Make sure the cups are positioned directly under the spouts (see figure 7). If you are making only one cup make sure you center the cup under the spouts. Make sure that the steam release knob (c) is in the "closed" position (turn knob clockwise). Plug in the machine and turn the "On/Off' switch (a) to the "On" position (see figure 8) 11. After approximately two minutes the water will have reached the proper temperature. The water at this time will pass through the coffee grinds, producing espresso in the cups, whichever size cup you have chosen. Once the coffee has stopped brewing, turn "OFP' the machine with the "On/Off' switch and the light will go out. Before you remove the filter holder for cleaning, make sure that the boiler is no longer under pressure (see section "Caution - Pressure"). CAUTION Use caution when removing the filter holder and filter basket, parts may still be hot. To remove filter holder, turn the filter holder to the left, past the "min" (minimum) markings until the filter holder dislodges from the machine. ATTENTION The filter holder/filter basket parts might still be very hot, they can be cooled down by running water over them. To make more espresso, proceed as follows: . Check to see if the boiler is empty and not under pressure (see section "Caution - Pressure"). of this section. . Repeat teps1-12 s CAPPUCCINO Cappuccino takes its name from the chocolate hues of the robes worn by the Capuchin monks who favored this delicious dessert coffee. [. . . ] No water in boiler container No coffee in filter holder Riter clogged up because coffee mixture is too fine or pressed down too hard. Problem: 3. Steamdoes not come out of steam nozzle Cause: . No water or not enough water in the boiler container . Steam nozzle is clogged (see section "Cleaning") . [. . . ]