User manual KRUPS 969

[. . . ] Allow to cool before putting on or taking off parts, and before cleaning the appliance. Do not operate any appliance with a damaged cord in order to avoid a hazard or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to your nearest authorized KRUPS Service Center for examination, repair or adjustment (see Limited Warranty). The use of accessory attachment not recommended by KRUPS may result in fire, electric shock or injury to persons. [. . . ] Remove any ground coffee which is lying around the filter (13). Turn the filter holder until it is firmly locked into place (6) (7). As soon as the coffee selection buttons begin to glow continuously, the machine is ready to operate Your machine is already preprogrammed for the preparation of one or two cups of espresso. Press your choice of coffee size by pressing or the respective coffee selection button (9) (10). When the programmed quantity is reached, espresso stops running automaticly. Remove the filter holder and the filter from the machine and take out the coffee grounds (14). The filter basket can be refilled to make more espressos. Caution: if the water container is empty and the pump is running, you will hear a very distinct noise, which is louder than the normal operating sound. Never let the machine run when the water container is empty as this can damage the pump. ", which stands for "Easy Serving Espresso", is a selected measure of coffee, ground and pressed between two filter papers making a coffee pod which is ready to use (for example "illy pods). This system makes it easy for you to prepare your espresso and to clean the machine. You can prepare hot water with this machine. Fill the water container (1) (2) (3) and turn on the machine (4). As soon as hot water button commences to glow continuously, the machine is ready to operate. When the desired quantity of water has run through, stop the machine by pressing again the hot water button (15). The thumping noise which occurs while steam is being produced comes from the intermittent regulation of the pump and has no effect on the proper working of the machine. Caution: during and after use of the machine, the metallic parts of the auto cappuccino accessory can become extremly hot. It is best to use fresh, skim or low-fat, well chilled milk. The milk container must also be cold (do not run it under hot water before frothing the milk). Using the Auto Cappuccino accessory The auto cappuccino accessory makes it easy to produce steamed frothy milk for making cappuccino, latte or even hot chocolate. Fill the water container with fresh, cold water (1) (2) (3) and turn on the machine (4). Pour about 100 ml of cold milk into a container. [. . . ] Pour in your steamed milk, filling the final 1/3 of your cup. Cafe latte For a state of the art latte, the ideal quantities are as follows: 1/3 espresso, 2/3 hot, steamed milk topped with some frothed milk. Prepare a classic espresso in a large cup. Water runs through Coffee grounds too Try a finer coffee. [. . . ]