User manual KRUPS ESPRESSO BRAVO PLUS 872

[. . . ] KRU PS Espresso Bravo Plus Model #872 Modhle #872 Modelo #872 @ Instructions for Use @ Manuel d'instructions @ lnstrucciones de USO IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: 0 Read all instructions and information in this instruction book and any other literature included in this carton referring to this product before operating or using this appliance. 0 To protect against fire, electric shock and personal injury do not immerse cord, plugs, or appliance in water or other liquid. 0 Close supervision is necessary when any appliance is used by or near children. 0 Unplug from outlet when not in use and before cleaning. [. . . ] Rather, remove the filter holder and reinsert it as described above until the arrow is within the lock range (see figure 3). Once the filter holder is properly in place, it should never be moved or attempted to be removed while the "Espresso Bravo Plus" is in operation and under pressure. Unscrew the boiler cap by turning it counter clockwise (see figure 5). Using the glass carafe, fill the boiler container with fresh, cold water (see figure 61. A CAUTION: Never fill the boiler while your "Espresso Bravo Plus" is in the u p y or " @?I " position. ft should only be in the `0" OFF position. Never fill the water past the top of the metal band on the glass carafe. NOTE: You may want to add a little extra water (approx. l/4 cup) to compensate for evaporation and absorption during the brewing process. However, do not fill past the top of the metal band on the glass carafe. The glass carafe (e) has markings on it for 2 cups and 4 cups of espresso and steaming: - 2 cups of water yields 2 cups of espresso. - 3 cups of water yields 2 cups of espresso, plus steam for frothing milk for cappuccino. - 5 cups of water yields 4 cups of espresso, plus steam for frothing milk for cappuccino. (= upper rim of metal band on glass carafe) 6. Place the boiler cap securely on the machine and turn it clockwise until it is secure (see figure 7). Place the carafe lid (dj on the carafe (e) so that the lid opening points toward the pouring spout of the carafe (see figure 8). Make sure that the nozzle in the filter holder points through the opening of the carafe lid (see figure 9). ATTENTION: Make sure that the overflow grid (fj is in place. To make espresso directly into one or two cups, clip the cup adapter (hj onto the filter holder before brewing (see figure 10). Place cups directly under the two spouts (see figure 11). Simply turn the selector switch to the " Q " position (see figure 12). The ON/OFF indicator light ljj will illuminate. After approximately 2 minutes the water will have reached the proper temperature. [. . . ] Then turn the selector switch to espresso position u p " and allow the descaling solution to pass through the brewing head. After each brewing cycle, switch off the appliance and allow the appliance to cool down. Repeat this operation once again. 12 Following this, allow 2 boiler containerfuls of clear water to run through the system. Insert the brewing sieve into the brewing head again and push the "Perfect Froth" onto the steam nozzle. Problem: Not enough froth when frothing the milk. [. . . ]