User manual KRUPS KM4065

[. . . ] US. qxd:KM 8005 franc)ais - copie. qxd 15/10/08 8:55 Page 2 When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and/or injury to persons, including the following: 1 - Read all instructions prior to first use. 3 - To protect against fire, electric shock and injury to persons, do not immerse cord, plugs or machine in water or other liquid. 4 - Close supervision is necessary when any appliance is used near children. Keep appliance out of reach of children. [. . . ] Place the ground coffee into the paper filter or directly into a permanent filter. After use, discard the grounds, and rinse the filter basket under running water. 10 cafetie?re Dahlstrom remanie?US. qxd:KM 8005 franc)ais - copie. qxd 15/10/08 8:55 Page 11 Use the PROG button to access 4 programmable functions. The LCD will display a different function for each time the PROG is pressed. The blinking display and the icon alerts you that the unit is in a programming mode. 1- Auto-On setting #1: Press PROG (r) once, the AUTO program #1 is indicated with a red light (o). PROGRAMMING THE UNIT English Press the H and Min buttons (p) to set a time for the machine to brew automatically. You can press and hold the buttons to move quickly through the hours or minutes. Regular Strong The display will show logos with the current time. Press PROG (r) when done. 2- Auto-On setting #2: Press PROG (r) twice, the AUTO program #2 is indicated with a red light (o). This second preset start time can be used for days with later wake times, ie weekends. After programming the automatic start time as described above, be sure to prepare the machine for a brew cycle with water in the tank, coffee in the brew basket, lid closed and carafe securely in place. 11 cafetie?re Dahlstrom remanie?US. qxd:KM 8005 franc)ais - copie. qxd 15/10/08 8:55 Page 12 Press the Auto-On button (n) to choose preset number 1 or number 2. You can check the preset times by pressing PROG (r). English 4- Current time; Setting the clock : Press PROG (r) 4 times. Press the H and Min buttons to set the time including AM/PM settings. This will ensure the Auto-On function activates at the proper time of day. 3- Auto-Off setting: Press PROG (r) 3 times, the number of hours will blink and the 2 red lights (o) on the control panel will blink. Use the H button (p) to change between 1, 2 or 3 hours. This function controls how long the heating plate will continue before automatically turning off. For best results we recommend brewing only as much coffee as you will consume in 30-60 minutes. Taste is affected the longer the coffee is allowed to sit on the heating plate. The machine will brew automatically at the designated time. The program will need to be activated when needed again. You can press and hold the buttons to move quickly through the hours or minutes. Press PROG when done. If you prefer a 24 hour clock or military time you can switch from AM/PM mode by pressing the H and min buttons simultaneously. The AM/PM symbol will disappear when the clock is running in 24 hour mode. 12 cafetie?re Dahlstrom remanie?The frequency of descaling depends on the hardness of your water and how often you use the coffee machine. If you notice the brew cycle has slowed it is generally time to descale the machine. [. . . ] We recommend that you use one measuring spoon or one tablespoon of coffee ground per cup. Coffee ground too fine (unsuitable for an automatic coffee maker). The carafe (f) is not well positioned on the hot plate (e). The coffeepot (f) was removed for more than 20 seconds during brewing and was not correctly put back on the hot plate (e). [. . . ]