User manual KUSSMAUL 091-148-12

[. . . ] SAFETY LOCK AUTOMATIC SAFETY LOCK A CONTROLLER WHICH PERMITS UNATTENDED ENGINE OPERATION BUT PREVENTS UNAUTHORIZED USE OF THE VEHICLE SIMPLE INSTALLATION PERMITS ENGINE TO RUN WITH THE IGNITION KEY REMOVED ENGINE STOPS AND CANNOT BE RESTARTED IF ATTEMPT IS MADE TO DRIVE AWAY MODEL #091-148-12 This simple, low cost controller bypasses the ignition switch when activated by the closure of a momentary switch. [. . . ] With the key in the lock and turned on, the ignition circuit is completed as normal and the opening of the SAFETY LOCK relay has no effect on engine operation. Weight: 4 ounces Enclosure: unsealed 4. 50 3/16" DIA. 2. 625 4. 00 OUTLINE DRAWING KUSSMAUL ELECTRONICS COMPANY, INC. 170 CHERRY AVE. , WEST SAYVILLE, NY 11796 TELEPHONE in NY: 631-567-0314 TOLL FREE: 800-346-0857 FAX: 631-567-5826 e-mail: sales@kussmaul. com IGNITION SWITCH +12 volt Power To Ignition System The common terminal of the relay must be connected to the +12 volt power for the unit to operate N. C. SET PUSHBUTTON D V Y NG LE SER RIT LLI A B O OLA ST P IN EN H W r to ica d In E +12 V Brake Light Switch This line resets Brake Light S1 12345 This line sets (bypasses ignition) Indicator illuminates when ignition switch is bypassed (OPTIONAL) INSTALLATION: 1. Mount unit in a suitable location protected from moisture and excessive heat. 2. Wire in accordance with the wiring diagram above OPERATION: 1. With the engine running depress the momentary SET switch S1. [. . . ] Insert the key, turn ignition switch to ON and verify that the engine continues to run when the brake pedal is depressed. MODEL 091-148-12 SAFETY LOCK A Controller To Permit Engine Operation With The Ignition Switch Removed INSTALLATION AND WIRING INSTRUCTIONS SINCE 1967, DESIGNERS OF INNOVATIVE PRODUCTS KUS S MAUL January 20, 2002 E L E C T R O N IC S C O M P A N Y , IN C . T EL: 631-567-0314, FAX: 631-567-5826, 170 CHERRY AVENUE, W EST SAYVILLE, NEW YORK, 11796-1221 USA [. . . ]