User manual KYOCERA AI 5050

[. . . ] Please read the instruction handbook before using the copier. Keep it close to the copier for easy reference. ) has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Specific matters for 50 ppm copier are covered on page 194 and thereafter. [. . . ] * When all originals has been read completely, go to step 10. * To clear the last page of originals read, touch the "Clear Last Job" key. * Print the test print by touching the "Test print" key. When the test print is completed, the display will return to the screen in step 9. * If an optional finisher is equipped, the setting of staple mode and punch mode can be changed in the same manner as with sorter mode setting. Set the number of copies by touch the "+" key or "-" key. The number can also be entered with the numeric key. 2 Two-sided copies from one-sided and two-sided mixed originals q Finishing like originals [Print as original] One-sided originals and two-sided originals are set and read by each; onesided originals are copied as one-sided, and two-sided originals are copied as 2-sided copies to Finish same as originals. Q Two-sided copies from all originals [Duplex all originals] One-sided originals and two-sided originals are set and read by each, and all originals are finished as two-sided copies without making blank pages. Q Copying desired page on the front side [Chapterize] The first page of each chapter can be copied onto the front side by setting the originals to be read by chapter. Select the function by touching the "Print as originals" key, "Duplex All Originals" key or "Chapterize 1/2 Sided Org. When setting the custom paper size or the custom zoom ratio, touch the manual key until "1:1" is displayed on the zoom ratio display. * When changing the zoom ratio, touch the "+" key or "-" key on the right side of the zoom ratio display. When setting the zoom mode, such as standard zoom or XY zoom, touch the "Zoom" key and follow the instruction on page 48 and after. * The setting of the zoom mode can be changed by each job. * When setting the border erase mode, touch the "+" key or "-" key on the right side of the display of the width of erasing border to set the width of erasing border. The width can be selected from 1/4", 1/2" and 3/4". * The border erase mode in this setting is effective only for the sheet originals. * The setting of the border erase mode can be changed by each job. * When setting margin mode, touch the "Margin" key and follow step 4 and after on page 58. the margin mode will be set to work for all jobs. The setting cannot be changed by each job and in the middle. [. . . ] (at room temperature of 68°F, humidity 65%RH), From energy saver mode: Within 30 secs. (at room temperature of 68°F, humidity 65%RH) First copy speed. Any ratio between 25 and 400% (in increments of 1%). Automatic feeding from drawers (2 drawers, capacity 550 sheets [75 g/m2]), deck (1 drawer, capacity 3, 000 sheets [75 g/m2], plus stack bypass tray (capacity 100 sheets [75 g/m2]) Copy paper . [. . . ]