User manual KYOCERA DF-760

[. . . ] Please read the Operation Guide before using this product. After reading, keep it close to the copier/printer for easy reference. This guide mainly explains usage when used with the copier feature. See the Extended Driver User Guide for more information on usage from a computer when using the printer feature. [. . . ] Booklets such as magazines can be created by folding at the center. Booklet Feature (Facing originals): Copies book originals to booklets consisting of two-sided copies with facing pages. Booklets such as magazines can be created by folding at the center. A maximum of 16 sheets can be bound in a single operation. Hole Punch mode can be used with Sort: ON, Staple and Sort: OFF modes. The following paper sizes can be used: Inch models · Paper weights must be between 45 g/m2 and 220 g/m2. The copies are automatically hole punched and ejected onto the selected tray. NOTE: Holes are punched in each copy individually, therefore the location of the holes may vary on each sheet. Take out the any existing original and set the original to use for interrupt mode. When done copying in interrupt mode, turn off interrupt copy mode from the machine itself. Paper printed at the machine can be output to the optional mailbox. This feature is useful when sharing the printer among multiple computers to output paper to specific trays for each user. The following paper sizes can be used: A3, B4, A4, A4R, B5, B5R, A5R, Folio, 11 × 17", 8 1/2 × 14", 11 × 8 1/2", 8 1/2 × 11", 5 1/2 × 8 1/2", 8K, 16K and 16KR NOTE: The maximum number of copies that can be Stored in each tray will differ depending on the size of copy paper being used. Write the name of the user of each tray on the labels provided and attach the labels to the side of each tray. The bins to which labels should be applied are 1, 2, 3, 4, 5, 6, 7 as counted from the top down. Use the printer driver on your computer to select a mailbox tray (mailbox) between 1 and 7. Select the paper size, page(s) to be printed and number of prints required. Do not look into the eject section while the machine is in operation. On the full color machine, the output tray can be specified with the copy and fax functions. On the monochrome machine, the output tray can be specified with the copy, fax, and printer functions. If a message displays indicating that staples have run out, the staple cartridge holder need to be replenished with staples. NOTE: If the Staple Unit runs out of staples, contact your service representative or the place of purchase. [. . . ] Pull pressure roller bottom adjust knob (E1) outward and turn in the direction of a higher number. If the paper is severely curled, turn the knob to "5". Align the knob with a number to lock the knob by setting the knob protrusions into the frame cutout area. Set pressure roller bottom adjust knob (E1) to `1'. [. . . ]