User manual KYOCERA DF-780

[. . . ] CAUTION: Indicates that personal injury or mechanical damage may result from insufficient attention to or incorrect compliance with the related points. symbols The symbol indicates that the related section includes safety warnings. Specific points of attention are indicated inside the symbol. Specifics of the prohibited action are indicated inside the symbol. [. . . ] When lifting or moving the product, contact your service representative. Do not touch electrical parts, such as connectors or printed circuit boards. they could be damaged by static electricity. DO NOT attempt to perform any operations not explained in this Operation Guide. This type of situation presents a danger of fire or electrical shock should any water fall inside. DO NOT damage, break or attempt to repair the power cable. DO NOT place heavy objects on the power cable, pull it, bend it unnecessarily or cause any other type of damage. These types of situations present a danger of fire or electrical shock. NEVER attempt to repair or disassemble this product or its parts as there is a danger of injury or fire or electrical shock. If this product becomes excessively hot, smoke appears, there is an odd smell, or any other abnormal situation arises, there is a danger of fire or electrical shock. Immediately turn the copier/printer OFF (O) at the main power switch and remove the copier/printer power plug from its outlet. Then contact your service representative. If anything harmful (paper clips, water, other fluids, etc. ) falls into this product, immediately turn the copier/printer OFF (O) at the main power switch, remove the copier/ printer power plug from its outlet and then contact your service representative. If you continue to use this product without taking these steps, there is a danger of fire or electrical shock. Names of parts (2) Ejection tray extension Pull this extension out when you want to copy or print onto 11" × 17", 8 1/2" × 14", B4 or A3 size paper. (3) Finisher release button Push this button when you want to separate the Document Finisher from the copier (or printer). (4) Top Cover Open this cover if a paper jam occurs inside of the Document Finisher. (5) Staple cover Open this cover when you want to replenish staples. (6) Staple cartridge holder The staple cartridge is installed here. Pull out this holder when you want to replenish staples. If finished copies or printouts come out curled or are stacked unevenly, turn the paper in the drawer [cassette] over and reload it. [. . . ] If a paper jam happens to occur during stapling, a staple may have jammed. In this case, perform the following procedure. Then, open the cover plate (A) of the staple cartridge holder and remove any jammed staples. Close the cover (A) plate of the staple cartridge holder into its original position. [. . . ]