User manual KYOCERA F-1000

[. . . ] No part of this material may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage and retrieval system, without permission in writing from the Publisher. Legal Restriction On Copying · It may be prohibited to copy copyrighted material without permission of the copyright owner. · It is prohibited under any circumstances to copy domestic or foreign currencies. · Copying other items may be prohibited. Please read the instruction handbook before using the copier. [. . . ] Duplex copying from various originals [Duplex copy] Duplex copies can be made from two-page originals or one-sided originals with the optional duplex unit. (2) Duplex copying from a book original Facing pages of a magazine or book are copied on both sides of the paper by a single press of the Start key. IMPORTANT · Duplex copies cannot be made with the multi-bypass. (1) Duplex copying from two-sided originals A two-sided original is copied onto both the front and back side of the paper. The copy looks just like the original. IMPORTANT · The paper size used in this mode is limited to A4. IMPORTANT · The paper sizes that can be used are A3 to A5R. 5-1 CHAPTER 5 (3) Duplex copying from one-sided originals The one-sided original is copied on both sides (back and front) of the paper. When an odd number of originals are copied, the back side of the last page is blank. FUNCTIONS 1 2 Set the original(s). Press the Duplex/Split Page key to light the indicator. The function selection screen will appear. NOTE · The back side copy can also be rotated 180 degrees. 1 Normal: The back side comes out in the same direction as the original. 2 Rotate: The back side is rotated 180 degree with respect to the original. When bound at the top, the copies are oriented in the same direction. 3 Make sure that "2-SIDED COPY" is selected and press the enter key. The duplex copy setting screen will appear. 4 Press the cursor down key to select the duplex copy mode. 5 Press the enter key. If "1-SIDED ORIG. > DUPLEX" was selected, go to the next step. If "DUPLEX ORIG. > DUPLEX" or "BOOK ORIGINAL" was selected, the message display will be changed to the "DUPLEX MODE. " screen. 5-2 CHAPTER 5 FUNCTIONS 6 Select whether to rotate the back side of the copy 180 degree or not. 7 8 Press the enter key. The message display will be changed to the "DUPLEX MODE. " screen. (a is the width of erasing border. ) 3 Press the cursor down key to select the border erase mode. 4 5 NOTE · The initial value of the erasing border width can be set. BORDER WIDTH" on page 6-13. ) Press the enter key. Press the cursor down or up key to select the erasing border width. The width can be selected from 6, 12 and 18 mm. 6 Press the enter key. The message display will return to the "READY TO COPY. " screen. 5-6 CHAPTER 5 FUNCTIONS 5. One copy from two or four originals [Layout copy] 2 or 4 originals can be combined into a single copy. The borderline of each original can also be marked with a solid line or dotted line. (2) 4-UP Use this mode to copy four originals onto one sheet. It can be used in conjunction with the duplex copy mode to copy eight originals onto one sheet, though this will require the optional duplex unit. (When setting originals on the platen, originals are arranged in the order from 1, 2, 3 and 4. ) NOTE · The original and copy paper must be the standard size. (1) 2-UP Use this mode to copy two originals onto one sheet. It can be used in conjunction with the duplex copy mode to copy four originals onto one sheet, though this will require the optional duplex unit. (When setting the originals on the platen, originals are arranged in the order from 1 to 2. ) NOTE · In the "4-UP" mode, the available modes differ depending on the orientation of the originals. · When performing duplex copy, the images on the back side can be rotated. NOTE · When performing duplex copy, the images on the back side can be rotated. 5-7 CHAPTER 5 FUNCTIONS 1 Press the Layout key to light the indicator. [. . . ] Light source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Developing system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fixing system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cleaning system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]