User manual KYOCERA FS-1110 OPERATION GUIDE

[. . . ] FS-1110 OPERATION GUIDE This Operation Guide is for model FS-1110. Note This Operation Guide contains information that corresponds to using both the inch and metric versions of these machines. The inch versions of these machines are shown in the screens in this guide. If you are using the metric version, use the messages provided for the inch version as reference only. [. . . ] The printer begins to warm up. IMPORTANT If you install the toner container and switch on the power, after a moment the indicators light in anticlockwise direction. When the printer is first switched on after toner installation, there will be a delay of approximately 15 minutes before the printer gets ready to print. Once the [Ready] indicator lights, printer installation is complete. 3-2 Connecting and Printing Installing the Printer Driver Ensure the printer is plugged in and connected to the PC before installing the printer driver from the CD-ROM. Installing the Software If you are connecting this printer to a Windows PC, follow the next steps to install the printer driver. The example shows you how to connect your printer to a Windows 7. Note In Windows operating systems, you must be logged in with administrator rights to install the printer driver. 1 2 Turn on the computer and start up Windows. If the Welcome to the Found New Hardware Wizard dialog box displays, select Cancel. Insert the CD-ROM supplied with the printer into the optical drive of the PC. In Windows 7, Windows Server 2008 and Windows Vista, the user account control window may appear. Note If the software install wizard does not launch automatically, open the CD-ROM window in Windows Explorer and double-click Setup. exe. 3 Click View License Agreement and read the License Agreement. Click Accept. 4 Click Install software. The print system detection window appears and the installer detects the connected printer. If the installer does not detect a print system, check that the print system is connected via USB and that it is turned on. Then click Refresh to search print system again. Note While the information shown in Windows Vista and Windows 7/Windows XP installation dialog boxes differs slightly, the installation procedure is the same. 5 Confirm the printer you want to be installed, and click Next. Note If the Found New Hardware Wizard appears, click Cancel. If a hardware installation warning message appear, click Continue. Connecting and Printing 3-3 6 A window appears in which you can check the settings. Check the settings carefully and then click Install. Note If the Windows security window appears, click Install this driver software anyway. 7 A message appears saying that the printer has been installed successfully. Click Finish to exit the printer installation wizard and return the CD-ROM main menu. If the device setup dialog box appears after you click Finish, you can specify the settings for items such as optional features installed in the print system. This completes the printer driver installation procedure. Follow the on-screen instructions to restart the system, if required. 3-4 Connecting and Printing Printing This section explains the printing procedure from an application software. You can specify the printing settings from each tab on KX Driver. [. . . ] 5-12 components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 minimum and maximum page sizes . . . . . . . . . . . . . . . . . . . . . 2-3 paper type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10 Paper gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]