User manual KYOCERA FS-1800N

[. . . ] FS-1800/N FS-3800/N Page Printers Installation Manual Caution NO LIABILITY IS ASSUMED FOR ANY DAMAGE CAUSED BY IMPROPER INSTALLATION. Notice on Software SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE PRINTER'S EMULATION MODE. The printer is factory-set to emulate the HP PCL 6. The emulation mode can be changed by following the procedures described in the User's Manual contained as an electronic file in the CD-ROM supplied with the printer. Notice The information in this manual is subject to change without notification. Additional pages may be inserted in future editions. [. . . ] Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. If an extension cord is used with this product, make sure that the total of the ampere ratings on the products plugged into the extension cord do not exceed the extension cord ampere rating. 6. 7. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product. Except as explained elsewhere in User's Manual, do not attempt to service this product yourself. Removing covers may expose you to dangerous voltage points or other risks. Refer all servicing in those compartments to service personnel. Unplug this product from the wall outlet and refer servicing to qualified service person-nel under the following conditions: A- When the power cord or plug is damaged or frayed. B- If liquid has been spilled into the product. C- If the product has been exposed to rain or water. D- If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. E- If the product has been dropped or the cabinet has been damaged. Canadian Department of Communications compliance statement This Class B digital apparatus complies with Canadian ICES-003. (FS-1800/FS-3800) This Class A digital apparatus complies with Canadian ICES-003. (FS-1800N/FS-3800N) Avis de conformité aux normes du ministère des Communications du Canada Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. (FS-1800/FS-3800) Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. (FS-1800N/FS-3800N) ISO 7779 Maschinenlärminformationsverordnung 3. GSGV, 18. 01. 1991: Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäß ISO 7779. CE Marking Directive According to Council Directive 89/336/EEC and 73/23/EEC Manufacturer's name: Kyocera Mita Corporation, Tamaki Plant Manufacturer's address: 704-19 Nojino, Tamaki-Cho, Watarai-Gun, Mie-Ken 519-0497, Japan declares that the product Product name: Page Printer Model number: FS-1800/FS-3800/FS-1800N/FS-3800N (as tested with the enhancement optional unit: PF-60, DU-60, and SO-60) Conforms to the following product specifications. EN 55 022:1998 Class B EN 61 000-3-2:1995 EN 61 000-3-3:1995 EN 55 024:1998 EN 60 950:1992 (+A1+A2+A3+A4+A11) EN 60 825-1:1994+A11 The manufacturer and its merchandising companies retain the following technical documentation in anticipation of the inspection that may be conducted by the authorities concerned. User's instruction that conforms to the applicable specifications Technical drawings Descriptions of the procedures that guarantee the conformity Other technical information Go to next page 23 Declaration of Conformity (Australia) Manufacturer's name: Manufacturer's address: declares that the product Product name: Page Printer Model number: FS-1800/FS-3800/FS-1800N/FS-3800N (as tested with the enhancement optional units: PF-60, DU-60, and SO-60) Description of device: This Page Printer Model FS-3800 is the 24 ppm (FS-1800 is the 16 ppm); A4 size and utilized plane paper; laser; dry toner etc. The printer can be equipped with several enhancement optional units as a paper feeder as PF-60, a duplexer as DU-60, a sorter as SO-60 etc. [. . . ] Lit: Indicates that the printer is on-line. Off: Indicates that the printer is off-line. Data can be received but will not be printed. Also indicates when printing is automatically stopped due to occurrence of an error. [. . . ]