User manual KYOCERA FS-C5016N

[. . . ] FS-C5016N Color Page Printer FS-C5016 N Operation Guide Please read the Operation Guide before using the printer. Keep it close to the printer for easy reference. The sections of this guide and parts of the printer marked with symbols are safety warnings meant to protect the user, other individuals and surrounding objects, and ensure correct and safe usage of the printer. The symbols and their meanings are indicated below. WARNING: Indicates that serious injury or even death may result from insufficient attention to or incorrect compliance with the related points. [. . . ] When the desired size is displayed, press the ENTER key. The display returns to Ready. 3-48 3. 6 Making Default Settings Setting the Code Set You can change the character code set. Available character code sets vary depending on the current font. (The default is IBM PC-8. ) 1 2 Press the MENU key. Press the or key repeatedly until Font > appears. Font > 3 4 Press the Press the key. or key repeatedly until >Code Set appears. >Code Set IBM PC-8 5 Press the ENTER key. A blinking question mark (?) appears. >Code Set ?IBM PC-8 6 7 8 Press the or key until the desired character code set appears. Press the ENTER key. The display returns to Ready. 3-49 3. 6 Making Default Settings Printing Lists of Fonts To help you decide in selecting a font, you can printout lists of the internal fonts or the optional fonts including downloaded fonts. Samples for font lists are shown in Figure 3-8 on page 3-51. 1 2 Press the MENU key. Press the or key repeatedly until Font > appears. Font > 3 4 Press the key. Press the or key repeatedly until >List of Internal Fonts or >List of Option Fonts appears. >List of Internal Fonts 5 Press the ENTER key. A question mark (?) appears. >List of Internal Fonts? 6 Press the ENTER key again. The printer prints out a list of fonts with a sample and font ID (number) for each of them. Sample lists of fonts are shown in Figure 3-8 on the next page. 3-50 3. 6 Making Default Settings Internal Scalable and Bitmapped Fonts List Font Name Scalable/Bitmap Password Selection [FSET] PRESCRIBE Font ID Internal Scalable and Bitmapped Fonts List Font Name Scalable/Bitmap Password Selection [FSET] PRESCRIBE Font ID Figure 3-8 3-51 3. 7 Pagination 3. 7 Pagination In Page Set menus, you can set the number of copies, page orientation, and other settings regarding pagination. 3. 7. 1 Number of Copies You can set the number of copies of each page to be printed for the current interface. The number of copies can be set between 1 and 999. 1 2 Press the MENU key. Press the or key repeatedly until Page Set > appears. Page Set > 3 4 Press the Press the key. or key repeatedly until >Copies appears. >Copies 001 5 Press the ENTER key. A blinking cursor (_) appears. >Copies 001 6 7 8 Press the or cursor. Use the key to increase or decrease, respectively, the value at the blinking and keys to move the cursor right and left. When the desired size is displayed, press the ENTER key. The display returns to Ready. 3-52 3. 7 Pagination 3. 7. 2 Print Orientation You can select portrait (upright) or landscape (sideways) page orientation. Portrait Orientation Landscape Orientation A A Figure 3-9 1 2 Press the MENU key. Press the or key repeatedly until Page Set > appears. Page Set > 3 4 Press the Press the key. or key repeatedly until >Orientation appears. >Orientation Portrait 5 Press the ENTER key. A blinking question mark (?) appears. >Orientation ? [. . . ] Cover the solder joints with a thermofit tube. Cut wires 4, 5, 6, and 20. Solder wires 5 and 6 together and connect them to pin 20. Cover the solder joints with a thermofit tube. Tape all remaining loose ends together, or seal them with a thermofit tube. [. . . ]