User manual KYOCERA KM-C1530

[. . . ] 4004-7734-12 INSTRUCTION HANDBOOK Please read the instruction handbook before using the copier. As an ENERGY STAR Partner, KYOCERA MITA AMERICA, INC. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. registered mark. All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage and retrieval system, without permission in writing from the Publisher. Legal Restriction On Copying ¥ It may be prohibited to copy copyrighted material without permission of the copy-right owner. [. . . ] Screen Pattern settings If moiré effects should occur in copies containing lines or shading, reduce their effects by selecting the appropriate setting. "Gradation" is the default setting; however, "Resolution" is also available. These settings are only available if "Text&Photo", "Photo Image" or "Printed Image" are selected. H H H H G 5-18 KM-C1530 Basic Operations To select the document type before copying 5 1 Position the document(s) to be copied. (Refer to page 4-1 for more details. ) 2 Select the desired color mode. (Refer to page 2-20 for more details. ) 3 Make sure that the Basic screen is displayed, and then touch [Original/ Density]. 4 Select the Original Image Type that best describes your document. 5 Specify any other necessary settings. H H H Paper (Refer to page 5-4 for more details. ) Zoom (Refer to page 5-14 for more details. ) Density (Refer to page 5-20 for more details. ) 6 Using the keypad, enter the number of copies you wish to make, and then press the [Start] key. KM-C1530 5-19 5 5. 7 Specifying the Copy Density Density settings G Basic Operations Background: This density can be set to adjust itself automatically or it can be manually set to one of eight levels. If the background density is set to "Auto", the background of the copy is automatically adjusted according to the background of the original document. To prevent the image on the back of newspaper or magazine articles from being copied, select a setting toward "Lighter". To copy pale colors in a bright area of the image, select a setting toward "Darker". Since selecting a setting too much toward "Darker" may print the image on the back of the document or selecting a setting too much toward "Lighter" may produce a very faint copy, select the appropriate level depending on the document. Density: This density can be set to one of eight different levels. Fine adjustments can be made to the copy density using the "Density" parameter of the "Color Adjustment" function on the Auxiliary screen. For more details, refer to the section "To adjust the density" on page 6-29. H H G H To specify the copy density before copying 1 Position the document(s) to be copied. (Refer to page 4-1 for more details. ) 2 Select the desired color mode. (Refer to page 2-20 for more details. ) 3 Make sure that the Basic screen is displayed, and then touch [Original/ Density]. 5-20 KM-C1530 Basic Operations 5 4 Touch [Density]. 5 Specify the desired Density settings, and then touch [Enter]. H If Background is set to "Auto", the density of the copy is automatically adjusted to the density of the document. 6 Specify any other necessary settings. H H H Paper (Refer to page 5-4 for more details. ) Zoom (Refer to page 5-14 for more details. ) Original Image Type (Refer to page 5-18 for more details. ) 7 Using the keypad, enter the number of copies you wish to make, and then press the [Start] key. KM-C1530 5-21 5 5. 8 Interrupting a Copy Job Basic Operations A long continuous copy operation or print job from the computer can be quickly paused in order to copy a different document. Note Some functions cannot be interrupted. In addition, some settings may not be available while a copy job is interrupted. For more details, refer to the "Function Combination Table" on page 11-10. To interrupt a copy job 1 Press the [Interrupt] key. The indicator on the [Interrupt] key lights up and the copy operation is paused. 2 Remove the document for the interrupted copy job, and then load the other document that you wish to copy. 3 Specify any necessary settings. ?Do you know what settings are selected when the [Interrupt] key is pressed? § When the [Interrupt] key is pressed, all functions and settings are reset to their defaults. 4 Using the keypad, enter the number of copies you wish to make, and then press the [Start] key to copy the other document. 5-22 KM-C1530 Basic Operations 5 5 After the other document is copied, press the [Interrupt] key. The indicator on the [Interrupt] key goes off. 6 Reposition the document for the interrupted copy job that was removed in step 2. 7 Press the [Start] key. The interrupted copy job continues. KM-C1530 5-23 5 Basic Operations 5-24 KM-C1530 Advanced Operations 6 6 6. 1 Advanced Operations Making Single-Sided/Double-Sided Copies The setting combinations of the various document and copy types and the procedure for selecting the appropriate settings is described below. Ö Copy] displays a screen that allows you to specify the type of the original document and the type of copy you wish to make. Single-Sided Ö Single-Sided: § This setting makes a single-sided copy from a single-sided document. Single-Sided Ö Double-Sided: Important) § This setting is only available if both the duplex unit (AD-35) and the memory (128MB × 2) are installed. This setting makes a double-sided copy from two single-sided documents Single-Sided Ö Single­2in1: Important) § This setting is only available if both the duplexing document feeder (RADF-11) and the memory (128MB × 2) are installed. This setting makes a single-sided copy of two pages side-by-side from two single-sided documents. KM-C1530 6-1 6 Single-Sided Ö Double­2in1: Important) Advanced Operations This setting is only available if the duplex unit (AD-35), the duplexing document feeder (RADF-11) and the memory (128MB × 2) are all installed. [. . . ] 6-4 Single-sheet feeding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1, 4-7, 4-9 Sleep mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26 Disabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]