User manual KYOCERA KM-C3225E

[. . . ] C2525E C3225E C3232E C4035E Operation Guide Please read the Operation Guide before using this machine. Keep it close to the machine for easy reference. This Operation Guide is for models C2525E, C3225E, C3232E and C4035E. In this guide, C2525E refers to the 25/25 ppm (prints per minutes) model, C3225E to the 32/25 ppm model, C3232E to the 32/32 ppm model and C4035E to the 40/35 ppm model. NOTE: This Operation Guide contains information that corresponds to using both the inch and metric versions of these machines. [. . . ] Place the original and press the Start key. If the original has been placed on the optional document processor, copying begins automatically. If the original is placed on the platen, Scan next original(s) is displayed. Place the next original page and press the Start key. If all original pages have been scanned, press [Scanning finished]. Complete sets of copies will be delivered on the output tray. 3-16 Basic Operation Interrupt Copy Interrupt copying is useful to pause one copy job and copy other originals with different copy settings. After completing the urgent job, you can resume the interrupted jobs according to their original settings. You can also pause copy or print jobs to make emergency copies. Follow the steps as below to use interrupt copying. 1 Press the Interrupt key. Interrupt Mode OK will be displayed. 2 3 Temporarily remove and set aside the original pages of the current job. Place the original for the interrupt job. 4 Specify the copy settings for the interrupt job and press the Start key. 5 After the interrupt job is completed, remove the originals and press the Interrupt key. If there was a job being printed, it will be resumed. 6 Replace the interrupted original and press the Start key to restart the job. 3-17 Basic Operation Job Reservation Scan an original and reserve the next job even when a copy or print job is being outputted. The reserved job will be started after the current job is completed. If the optional fax is installed, reserve jobs even when received fax data is being printed. Follow the steps as below to use Job Reservation mode. 1 Press [Reserve next copy]. Copying can be reserved will be displayed. opying. Count/Set Output Reserve next copy Auto % 11×8½" Color, 1 side Plain Pause Top tray 2 3 Place the Job Reservation original. Specify the copy settings for the reserved job. To cancel a reserved job, press [Finish Job res. ] ([Job resrv. ( Full-Color ) 11×8½" Plain 11×17" Color 11×8½" Plain 11×8½" Plain Basic User choice Paper Size 11×8½ 100% APS MP tray Color Auto % 100% Reduce /Enlarge Function Auto Exposure Exposure Mode Color func. Staple Off Staple Left Top Staple Program 4 Press the Start key. After scanning all the originals, the touch panel will return to output screen. The reserved job will be started after the current job is completed. 3-18 Basic Operation Canceling a Print Job Follow the steps below to cancel printing and clear data. Canceling a Print Job Currently Being Processed Use the printer screen to cancel a print job that is currently spooling. 1 Press the Printer key. 2 Press [Cancel]. Processing. Orig. Page 11×8½" Network I/F Cancel User name: NO USER NAME 3 Select the interface to cancel. Select interface to cancel the job. Back Current Job Parallel Network On Serial USB 4 Printing is canceled. 3-19 Basic Operation Scanner Operation This section explains basic scanner operation. [. . . ] 2. Open duplex unit A1 and remove any 3. Open fixing cover A2 to check paper inside. JAM 00 1 Open left cover 1. 2 Remove any jammed paper. If the paper tears, remove any loose scraps from the machine. 3 Open duplex unit A1. 6-25 Troubleshooting 4 Remove any jammed paper. If the paper tears, remove any loose scraps from the machine. 5 Open fixing unit cover A2. The fixing unit of this product is extremely hot. [. . . ]