User manual KYOCERA KM-C4008

[. . . ] <IMPORTANT> This Operation Guide is for the C4008 MFP. · Standard equipment C4008: Duplex Unit and one 500-sheet capacity drawer[cassette] NOTE: This Operation Guide contains information that corresponds to using both the inch and metric versions of this copier. When the difference in a message is only one of upper- and lower-case spelling, we have listed the information as it specifically pertains to the inch version of this machine. When there is even a slight difference in the message, we have listed the information for the inch version followed, in brackets, by the corresponding information for the metric version. All rights reserved. [. . . ] (All) (1~999, 999) Limited value Back Close No limit No limit No limit No limit No limit No limit Change # No limit Counter limit Is not permitted 999, 999 clear Default setting - Management - Management edit Management - Management edit - New register 3 To set the maximum number of printouts that can be made under this ID-code, press the "Counter limit" key and proceed to the next step. To allow unlimited printing, press the "No limit" key, and to cancel printing privileges completely, press the "Is not permitted" key and proceed to step 5. (All) Back Close 5 Press the "Close" key. The touch panel will return to the screen in step 2. No limit Counter limit Is not permitted Management - Management edit - New register Metric specifications Printer limit. (All) Back Close No limit Counter limit Is not permitted Management - Management edit - New register NOTE If you want to quit the displayed setting without changing it, press the "Back" key. The touch panel will return to the screen in step 2. 7-17 Section 7 COPIER MANAGEMENT Printing restrictions (Full color) Perform the following procedure when you want to set the maximum number of full color printouts that can be made under the corresponding department ID-code. 3 NOTES · This setting will not be available when "Is not permitted" is selected as the "Printing restrictions (All)" setting. · Even if a department ID-code does not exceed the limit that is designated under this setting, further use of the machine will be canceled or an error message will appear if the limit that is designated under the "Printing restrictions (All)" setting is exceeded. To set the maximum number of full color printouts that can be made under this ID-code, press the "Counter limit" key and proceed to the next step. To allow unlimited full color printing, press the "No limit" key, and to cancel full color printing privileges completely, press the "Is not permitted" key and proceed to step 5. (Full. Col. ) Back Close No limit Counter limit Is not permitted Management - Management edit - New register 1 Access the screen that contains the copy restriction setting items. (See "Accessing the copy management menu screen" on page 7-3 or "Change restrictions for use" on page 7-23. ) Inch specifications Management edit Department 01 02 0001 0014 00000015 00000016 00000017 1st Sales Dept. correction Delete Register Close Metric specifications Print. (Full. Col. ) Back Close No limit Counter limit Is not permitted Management - Management edit - New register Limit in use Down 001/010 NOTE If you want to quit the displayed setting without changing it, press the "Back" key. The touch panel will return to the screen in step 2. Close Default setting - Management Metric specifications Management edit Department 01 02 0001 0014 00000015 00000016 00000017 1st Sales Dept. correction Delete Register 4 Limit in use Use the numeric keys on the keypad to enter the maximum number of full color printouts that can be made under this ID-code. The printing limit can be set to any 1-page increment up to 999, 999. (Full. Col. ) (1~999, 999) Limited value Back Close Down 001/010 Default setting - Management 2 Select "Print. (Full. Col. )" under the "Setting item" column on the left side of the touch panel and then press the "Change #" key. (Full. Col. )" screen will be displayed. Inch specifications Limit in use 0007 1st Sales Dept. Setting item Copy limitation (All) Copy limit. (Full. Col. ) Scanner limitation Fax Transm. Limitation Value Close No limit Counter limit Is not permitted 999, 999 clear Management - Management edit - New register Metric specifications Print. [. . . ] 6-57 Selecting functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Selecting the color mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Selecting the image quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 Selecting the location of copy ejection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]