User manual KYOCERA LDC-790

[. . . ] A label shown in the illustration assures that the supplies are our own brand. Included Guides The following guides are supplied with the machine. Refer to them as necessary. Quick Installation Guide Safety Guide Safety Guide (FS-2100D/ FS-2100DN/FS-4100DN/ LDC-790/FS-4300DN) Describes the procedures for installation of the machine. Provides safety and cautionary information for the installation and use of the machine. Be sure to read this guide before using the machine. [. . . ] Formatting of the SD/SDHC memory card must be executed from the printer. When a new SD/SDHC memory card is inserted in the printer's slot, Format SD Card will appear on the message display. 1 Format. z SD Card [ Yes ] [ No ] In the Device Common menu, press  or  to select Format SD Card. A confirmation screen appears. 2 3 Press [Yes] ([Left Select]). screen appears and SD/SDHC memory card formatting begins. Once the formatting ends, the standby screen reappears. Pressing [No] ([Right Select]) returns to the Device Common menu without formatting the SD/SDHC memory card. Display Bright. (Display brightness setting) Sets the brightness of the message display. 1 In the Device Common menu, press  or  to select Display Bright. . 4-83 Operation Panel Display Bright. : a b 1 Darker -2 2 Darker -1 3 *Normal 0 ********************- 2 Press [OK]. screen appears showing the available brightness settings. The list shows the following brightness settings: Darker -2 Darker -1 Normal 0 Lighter +1 Lighter +2 3 4 Press  or  to select the desired brightness. The brightness is set and the Device Common menu reappears. Disp. Backlight (Display backlight setting) Set the backlight for the message display. 1 Disp. The Login User Name entry screen is displayed. [ ] 4 Enter the Login User Name using the numeric keys then press [OK]. The log in screen reappears. Note The initial setting for the administrator's Login User Name is "Admin". For details on entering characters, refer to Character Entry Method on page A-2. 4-86 Operation Panel Login User Name: O b Admin Login Password: /******************[ Login ] 5 Press  or  to select the Login Password entry field. Login Password: * ABC Text a b 6 Press [OK]. The Login Password entry screen is displayed. [ ] Login User Name: O b Admin Login Password: ●●●●● /******************[ Login ] 7 Enter the Login Password using the numeric keys then press [OK]. The login screen reappears. Note The initial setting for the administrator's Login Password is "Admin". For details on entering characters, refer to Character Entry Method on page A-2. Timer Setting: a b 1 Auto Panel Reset ********************2 PanelReset Timer 3 Sleep Level Set. [ Exit ] 8 Pressing [Login] ([Right Select]). If the entered Login User Name and Login Password are correct, the Timer Setting menu appears showing a list of available options. Auto Panel Reset (Auto panel reset setting) The Auto Panel Reset function automatically restores the default settings if the panel is not used for a set time. For setting the time until the panel is automatically reset, refer to PanelReset Timer (Setting the panel reset timer) on page 4-88. 1 Auto Panel Reset: a b 1 Off 2 *On ********************- In the Timer Setting menu, press  or  to select Auto Panel Reset. The Auto Panel Reset screen appears. 2 3 4 Press  or  to select whether Auto Panel Reset is enabled. The Auto Panel Reset setting is set and the Timer Setting menu reappears. 4-87 Operation Panel PanelReset Timer (Setting the panel reset timer) When Auto Panel Reset is set to On, this sets the time until the panel is automatically reset after the user stops using the panel. The default setting is 90 seconds. 1 PanelReset Timer: a b (5 - 495) /90-sec. In the Timer Setting menu, press  or  to select PanelReset Timer. The PanelReset Timer screen appears. 2 3 4 Sleep Level Set. [. . . ] The number of bits in the prefix indicates the length of the network address. The term "prefix" refers to something added to the beginning and, in this context, indicates the first section of the IP address. When an IP address is written, the length of the network address can indicated by the prefix length after a forward slash (/). For example, "24" in the address "133. 210. 2. 0/24". [. . . ]