User manual KYOCERA PF-660

[. . . ] Specifics of the required action are indicated inside the symbol. [Remove the power plug from the outlet] . [Always connect the product to an outlet with a ground connection] Please contact your service representative to order a replacement if the safety warnings in this Guide are illegible or if the guide itself is missing (fee required). Avoid placing this product on or in locations which are unstable or not level. [. . . ] This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Holding the paper on both sides, bend the edges downward so that the middle curves upward. Holding your thumbs in place toward the center, unbend the paper so that the bottom sheet is back at its original position. Your thumbs should prevent the stack from straightening out, forming a hill-like shape. Fluff the paper, raising one hand and lowering the other, then alternating. The individual sheets are slightly lifted, separated from each other. If the paper is curled or folded, straighten it before loading. Paper that is curled or folded may cause paper jams. IMPORTANT: If you copy onto used paper (paper already used for copying), do not use paper that is stapled or clipped together. This may damage the copier or cause poor image quality. If ejected copies are not flat or are stacked unevenly, turn the paper in the side feeder over and reload it. Avoid exposing opened paper to high temperatures and high humidity as dampness may cause copying problems. Seal any remaining paper after loading the side feeder in its original package. If the copier will not be used for a prolonged period, protect all paper from humidity by removing from the side feeder and sealing in the original package. The following paper sizes can be used in side feeder. NOTE: After loading paper, be sure to specify the type of the paper loaded in the side feeder on the operation panel. The available options are plain, recycled, colored paper and thick paper. for details , refer to the Operataion Guide for the machine. Consult your Dealer or Service Representative for changing the paper sizes. Align the paper flush against the left side in the back of the feeder as you load it. [. . . ] If the paper tears, remove any loose scraps from the copier. Close the top cover of the side feeder softly. Paper Size Supported Paper Dimensions (W) × (D) × (H) Weight Inch models: 11 × 17", 8 1/2 × 14", 8 1/2 × 11", 11 × 8 1/2" Metric models: A3, A4, A4R Weight: 60 ~ 200 g/m2 Paper Types: Plain, recycled, colored paper, and thick paper. Other switches on the equipment are only functional switches and are not suitable for isolating the equipment from the power source. [. . . ]