Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KYOCERA PH-5D. We hope that this KYOCERA PH-5D user guide will be useful to you.
Lastmanuals help download the user guide KYOCERA PH-5D.
Manual abstract: user guide KYOCERA PH-5DINSTALLATION
Detailed instructions for use are in the User's Guide.
[. . . ] 1 Be sure to remove any fixing tapes or cushioning material attached to the supplied parts. Before installing the hole punch unit, make sure the MFP's main power switch is turned off and that its power cord is unplugged from the power outlet. Install the document finisher first and then install the hole punch unit. [. . . ] Close the front cover of the document finisher. Engage the pawl on the upper side of the punch PCB (B) with the groove at the back of the document finisher. Secure the punch PCB (B) with M4 × 8 tap Tight S screw (F). Open the wire saddle (12) and put the 2P-connector (13) on the motor through the wire saddle to fix the punch PCB (B). Figure (a): 6P-connector (14) of power coed (C) and 6P-connector (15) of sensor Figure (b): 2P-connector (13) of power cord (C) and 2P-connector (16) of motor Figure (c): 9P-connector (17) of power cord (C) and 9P-connector (18) of document finisher power cord 14. Figure (d): 6P-connector (19) of power cord (C) and YC3 connector (20) of punch PCB (B) Figure (d): 4P-connector (21) of power cord (C) and YC1 connector (22) of punch PCB (B) Figure (d): 9P-connector (23) of power cord (C) and YC2 connector (24) of punch PCB (B) Figure (e): 9P-connector (25) of power cord (C) and 9P-connector (26) of document finisher power cord Figure (d): connecteur 6P (19) du cordon d'alimentation (C) et connecteur YC3 (20) de la carte de perforation (B) Figure (d): connecteur 4P (21) du cordon d'alimentation (C) et connecteur YC1 (22) de la carte de perforation (B) Figure (d): connecteur 9P (23) du cordon d'alimentation (C) et connecteur YC2 (24) de la carte de perforation (B) Figure (e): connecteur 9P (25) du cordon d'alimentation (C) et connecteur 9P (26) du cordon d'alimentation du finisseur de document Engage the pawl (27) of the document finisher with the concave section (28) at the back of the top cover (7) which was removed in step 3. After that, reinstall the top cover (7) by pressing the finisher releasing lever (6) with four screws (5). If the pawl (27) is not securely engaged with the concave section, the top cover (7) is loose, which may cause incorrect operation of the document finisher. Close the upper cover (3) and the tray C (4) which were opened in step 2. Use four screws (1) to reinstall the back cover (2) which was removed from the document finisher in step 1. Plug the MFP into a power outlet, and turn on its main power switch. In the punch mode, perform a test copy with paper fed from the MP tray. If any off-centering is observed, follow the procedure below to adjust the hole position. Loosen two M4 × 10 tap Tight S screws (G) of the hole punch unit (A). When holes are punched too far lower copy example (a): Slide the hole punch unit (A) to the direction indicated by the black arrow. When holes are punched too far upper copy example (b): Slide the hole punch unit (A) to the direction indicated by the white arrow. [. . . ] Repeat steps 1 to 3 until the distance from the leading edge to the punch hole indicates the value within the reference range. When using the hole punch unit of Swedish specification, enter the maintenance mode U234 and select SWEDEN METRIC. This accessory is for use only with the following Applicant's Listed Machine. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KYOCERA PH-5D
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KYOCERA PH-5D will begin.
