User manual KYOSHO GP ALPHA2 EXPLODED VIEW

[. . . ] where you have failed to read this user manual). · (b) you bring the unit to a repair centre and there is no defect in the product (i. e. where you have failed to read this user manual). The amount of such administration charge will be advised to you before any work or home visit is carried out. [. . . ] Holiday: The Holiday Management settings can be applied to the Timer. Repeat : Specify the period for which you want to repeat the selected Timer. Once: Activate the timer only one time. Mon~Fri: Activate the timer from Monday through Friday. Mon~Sat: Activate the timer on Saturdays and Sundays. Manual: Customize days of the week. The checkboxes to select days of the week below Repeat are enabled only if Manual is selected. Holiday Management Holiday Management allows you to prevent devices that are set to be powered on by the Timer from turning on at a specified date. The Holiday Management function can be enabled or disabled in the Timer settings menu. Add: You can specify holidays: Click the Add button in the Holiday Management window. Delete: Delete holidays: check the corresponding checkboxes and click this button. List of holidays: View a list of holidays you have added. Screen Burn Protection Pixel Shift Move the screen slightly at specified time intervals to prevent screen burn-in. Screen Saver This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time. Interval: Set the interval to activate the Screen Saver. Mode: The Time setting can vary for each Mode. Safety Screen The Safety Screen function can be used to prevent screen burn-in when a stationary image displays on the screen of a display device for an extended period of time. Lamp Control Lamp Control is used to adjust the backlight to reduce power consumption. Automatically adjust the backlight of the selected display device at a specified time. If Manual Lamp Control is adjusted, Auto Lamp Control will automatically switch to Off. Manually adjust the backlight for the selected display. The remote control does not work. Adjust the time on the PC to synchronize the time between the connected displays. The remote control may not work if the RS-232C cable is removed or the program is closed abnormally while the Remote Control function is Disable. To resolve this, run the program again and set Remote Control to Enable. This program may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emitted from nearby electronic devices. How display properties are shown when multiple displays are used 1 2 3 4 When no display is selected: The default value is displayed. When one display is selected: Settings for the selected display are displayed. in sequence of ID 1 andID 3): The settings for ID 1 are displayed before the settings for ID 3. When the All+Select checkbox is checked and all displays are selected: The default settings are displayed. Adjusting the LCD Display Input Available Modes · · · · · · PC / DVI / DisplayPort AV Component HDMI MagicInfo TV Note To watch TV on the product, connect a TV tuner box (sold separately). (US Only) Note Using MagicInfo · To use MagicInfo with an MXN-3, MPN-3 model, connect the MagicInfo output on the already included network box to [HDMI IN 2 (MAGICINFO)] on the product. To use MagicInfo with an MX-3, MP-3 model, install inside the product a network box specified by Samsung and connect the MagicInfo output on the network box to[HDMI IN 2 (MAGICINFO)] on the product. · Source List Use to select PC, HDMI or other external input sources connected to the LCD Display. Use to select the screen of your choice. PC DVI AV Component HDMI1 - This is deactivated when a TV tuner box is installed. HDMI2 - This is deactivated when a network box is installed. Adjusting the LCD Display 7. [. . . ] Unit: Hz Example: If the same light repeats itself 60 times per second, this is regarded as 60 Hz. Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle. The inverse number of the Horizontal Cycle is called Horizontal Frequency. Unit: kHz Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non-Interlace method while showing odd lines and then even lines in turn is called the Interlace method. [. . . ]