User manual KYOSHO PERFEX KT-5

[. . . ] Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association. Ownership of all other trademarks is attributed to their due owner. An administration fee may be charged if either (a) an engineer is called out at your request and there is no defect in the product (i. e. where you have failed to read this user manual). [. . . ] The following message appears repeatedly. Check that the display is powered on. (See the power status in the system information chart. ) Ensure you select the input source the display is connected to. Check that the display you want to control is selected. Displays power on or off at different time from one another even though On Time or Off Time is set. The remote control does not work. Adjust the time on the PC to synchronize the time between the connected displays. The remote control may not work if the RS-232C cable is removed or the program is closed abnormally while the Remote Control function is Disable. To resolve this, run the program again and set Remote Control to Enable. This program may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emitted from nearby electronic devices. 3 Using MDC 92 3 1 2 3 4 Using MDC How display properties are shown when multiple displays are used When no display is selected: The default value is displayed. When one display is selected: Settings for the selected display are displayed. in sequence of ID 1 and ID 3): The settings for ID 1 are displayed before the settings for ID 3. When the All+Select checkbox is checked and all displays are selected: The default settings are displayed. 3 Using MDC 93 4 Screen Adjustment Configure the Picture settings (Brightness, Color Tone, etc. ). The layout of the Picture menu options may vary depending on the product. The available options in the Picture menu depend on the selected input source and the settings in Edit Name. (Refer to page 57 for details about Edit Name. ) To use TV, connect a TV tuner box to the product. The change will be applied. 4 Screen Adjustment 97 4 Screen Adjustment If the input source is AV, Component or TV: Custom Contrast Brightness Sharpness Color Tint 100 45 50 50 G r e e n 50 R e d 50 Move Enter Return Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. Brightness Adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. Color Increase or decrease the color intensity. (Range: 0~100) A higher value will increase the color intensity. Tint Adjust the intensity of the red and green colors. (Range: 0~100) Increasing the red level will make the red color more prominent in the picture. Increasing the green level will make the green color more prominent in the picture. 1 Press / to move to the option you want and press [ ]. [. . . ] Interval: Display a moving image along with a logo for 60 seconds after using for 4 hours. Appendix 165 Appendix The best way to protect the monitor from afterimage burn-in is switching the power off or setting the PC or system to run a screen saver when not in use. Also, Warranty service may be limited depending on instruction guide. Screen Scroll Function Screen Scroll Effect: A black bar moves horizontally. FLIGHT OZ348 UA102 Screen Bar Horizontal bar with Black color TIME 20:30 21:10 Effect: Two black bars move vertically and horizontally. Horizontal bar FLIGHT OZ348 UA102 TIME 20:30 21:10 Screen Delete Function Screen Scroll Effect: A black bar moves horizontally. Appendix 166 Appendix Terminology Dot Pitch The monitor and screen consist of red, green and blue dots. A shorter distance between the dots produces a higher resolution. [. . . ]