User manual KYOSHO ULTIMA SC-R

[. . . ] In order to operate the model safely, adhere to following instructions: *Here are some possibilities of significant damage to life and/or body, if the following explanations are not adhered to: Before you begin, read the manual thoroughly. First time builders should seek advice from modelers who have experience in assembling models. Never disassemble or install batteries with the polarity reversed. [. . . ] This kit requires a 2 channel radio con-trol set with electric speed controller. Use stick-type or wheel-type transmitter, whichever suits you best. For painting the body, use Kyosho paints for models!8 Check that the servos move in accordance with the control from transmitter. Before assembling, please read the following carefully: First, read this instruction manual and familiarise yourself with the model's construction. Should any parts be missing, contact the retail shop from whom the model was purchased. Compare nuts, bolts, screws, etc to the "Actual Size" drawings on each page before fitting to ensure that you are installing the correct parts. Tighten Self tapping (TP) screws into parts until you have a secure attachment. However, be careful not to overly tighten TP screws as the threads may be damaged. This kit contains screws and hardware in different metric sizes and shapes. Before using them, check the screws on the true-to-scale diagrams on the left side in each assembly step. How to read the instruction manual: A: Gives the name of the part being made and the serial number of steps for B: Details the key-number of parts, actual-size drawings and quantity of parts to use. C: All parts, except screws, are identified by key Numbers. When purchasing spare Parts, identify the key number of the part required and cross reference this to the Spare Parts page, which shows the purchasable spare parts and the key numbers contained within. d: This instruction manual uses several symbols. Pay careful attention to them during construction. [. . . ] Refer to the pictures on the box for the color scheme. After painting, remove the protective film from the body shell. Paint the body shell from the inside using Kyosho spray colors. [. . . ]