User manual KYOSHO V-ONE RR

[. . . ] @ You are responsible for this model's assembly and safe operation! Oe Always keep this instruction manual ready at hand for quick · OeBecause there are stick-type and wheel-type transmitters, use which ever fits your convenience best. [. . . ] Self-tapping (TP) screws cut threads into the parts when being tightened. Excessive force may permanently damage parts when tightening TP screws. It is recommended to stop tightening when the part is attached or when some resistance is felt after the threaded portion enters the plastic. B The side with the step is a reverse screw. 6mm Cap Screw to 120 Collar till the screw stops, and unscrew 3 rounds, then please set up according to the track condition. " " Select according to the engine you use. B 'è Tighten the screws with one sheet of paper inserted b etween both gears. B Attach Glass Tape around while holding the battery and 90 on flat place. B b 'è Use 162 Nylon Strap (Small) to keep cords away from moving parts. B Always run your car with the body shell fitted!Avoid changing the running direction too often and too abruptly. Do not run your car on ground: · B , K , Ì OE¯ , Ì , ð In order to avoid accidents and personal injury, be sure to observe the following: B Since exhausts and fuel vapors are noxious to health, use fuel only outdoors! [. . . ] The place for storage should be dark, cool and dry!B 124 FM371 Parts indentified only by key numbers are not sold individually ! [. . . ]