User manual KYOSHO V-ONE RRR WC TEAM EDITION EXPLODED VIEW

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KYOSHO V-ONE RRR WC TEAM EDITION. We hope that this KYOSHO V-ONE RRR WC TEAM EDITION user guide will be useful to you.

Lastmanuals help download the user guide KYOSHO V-ONE RRR WC TEAM EDITION.


Mode d'emploi KYOSHO V-ONE RRR WC TEAM EDITION
Download

You may also download the following manuals related to this product:

   KYOSHO V-ONE RRR WC TEAM EDITION PARTS LIST (4176 ko)

Manual abstract: user guide KYOSHO V-ONE RRR WC TEAM EDITIONEXPLODED VIEW

Detailed instructions for use are in the User's Guide.

[. . . ] For compliance with the Federal Noise Interference Standard, this equipment requires a shielded cable. This statement will be applied only for the printers marketed in U. Statement of The Canadian Department of Communications Radio Interference Regulations This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada. [. . . ] 5 second intervals Flashes at 1 second intervals ERROR lamp On Flashes at 0. 5 second intervals Flashes at 1 second intervals Recovery Conditions This is not a recoverable error. Note 1) If a non recoverable error occurs, turn the power OFF immediately. 2) When Power supply error occurs, there is a possibility that the power supply unit has a trouble. 125 second intervals Recovery Conditions Recovered If the cutter returns to the home position after turning the power OFF and ON. Restoration is also possible with the <DLE><ENQ>n command when in the ESC/POS mode. Note 1) If the cutter doesn't return to the home position, or doesn't perform the initial movement, it cannot be recovered. 2) If the paper is jammed, turn the power off, clear the jammed paper, then turn the power ON. 5 second intervals Flashes at 2 second intervals Recovery Conditions Automatically recovered by loading a new paper roll, then closing the printer cover. In other words, recovery will be attained automatically when paper is set in the printer and the cover closed after printing has stopped if the parameter has been set to cease printing. (1) Test Printing Turn the power on while holding the FEED button depressed. Do not pull out paper while the printer cover is closed. Do not touch them with metal objects, sandpaper, etc. During and immediately after printing, the area around the thermal head is very hot. Do not touch it, as you could be burned. Printing quality may suffer if the thermal head heating element becomes soiled by being touched with your hands. Do not touch the thermal head heating element. There is a risk of damage to the driver IC of the thermal head from static electricity. The printing quality and working life of the thermal head cannot be guaranteed if any paper other than that recommended is used. In particular, paper containing [Na+, K+, C1-] may drastically reduce the working life of the thermal head. Do not operate the printer if there is moisture on the front surface of the head from condensation, etc. Use the following procedure to adjust the near-end sensor so it is compatible with the size of roll paper you are using. [. . . ] The settings will become effective when the power switch is set to on again. Then take off the DIP switch cover, as shown in the illustration below. The new settings take effect when you turn on the printer. All factory settings for dipswitch 1 on the auto cutter model are set at [ON]. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KYOSHO V-ONE RRR WC TEAM EDITION

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KYOSHO V-ONE RRR WC TEAM EDITION will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag