User manual LA CROSS TECHNOLOGY WS-7097U

[. . . ] Outdoor temperature sensor World Time Center Introduction Congratulations on purchasing this state-of-the-art World Time Center as an example of superior design and engineering. Providing radio controlled time, indoor temperature and humidity displays, outdoor temperature, this unit will never keep you guessing on time, date or current and future weather conditions. Operation of this product is simple and straightforward. By reading this operating manual, the user will however receive a better understanding of the WorldTime Center together with the optimum benefit of all its features. [. . . ] Set the desired month by use of then "+" key. Press the "SET" key to move to the mode "Date Setting". Date Setting 1. The digits for the date will start flashing on LCD 1 (Default setting 1). Set the desired date by use of the "+" key. Note: The date can only be set in conjunction with the selected month. I. e. , it is not possible to set the date 30 if the month of February is selected. Press the "SET" key to enter the mode "Setting of Year". + Key · Serves in programming mode the change/selection of all changeable/selectable values and displays. Manual programming Note: If the World Time Center has already successfully received the WWVB time signal and displays the correct time and date, then the Manual programming can be omitted. After completion of the above described procedures in "Basic Setup" the manual programming mode can be entered by pressing the "SET" key for about 2 seconds. The following settings can now be programmed: · · · · · · · · · · 12/24 hour setting Time setting Weekday setting Month setting Date setting Year setting World Time location setting World Time setting ºC or ºF setting LCD contrast setting 2. Year Setting 1. The year digits will start flashing on LCD 1 (Default setting 1998). Select the desired year by use of the "+" key. Note: The year can be selected sequentially from 1998 to 2020 and will then start over again. The year furthermore will only be visible on the display of LCD 1 in programming mode. Press the "SET" key to switch to the mode "Worldtime Location Setting". 3. Worldtime Location Setting 1. The dash representing the first character of the worldtime location (Default setting - - -) on LCD 1 will start flashing. Select the desired character by use of the "+" key. Press the "SET" key to move to the second character. Select the desired character by use of the "+" key. Press the "SET" key to switch to the third character. Select the desired character by use of the "+" key. Note: For designation of the worldtime location the characters "A" through "Z" and "0" as well as "-" and " " (Space) can be chosen. Before securing the transmitter to the desired location, check that the temperature can be received first. To affix by screw, follow these steps: Reset of all Data By removing the batteries from both World Time Center and Temperature sensor all displayed data will be lost. [. . . ] Please help in the preservation of the environment and return used up batteries only to an authorized depot. Specifications Radio controlled time signal Recommended operating temperature World Time Center LCD contrast Temperature measuring range Indoor : : : : WWVB 0°C to +50°C 8 levels +14ºF to +158ºF with 0. 2ºF resolution (-9, 9°C to +59, 9°C with 0. 1°C resolution) ("OFL" displayed if outside this range) -22ºF to +158ºF with 0. 2ºF resolution (-29. 9°C to +69, 9°C with 0. 1°C resolution) ("OFL" displayed if outside this range) 19% to 96% with 1% resolution (Display "- - -" if outside this range) Every 20 seconds Every 1 minute Every 10 seconds 3 x 1. 5V Battery Typ AA, IEC LR6 2 x 1. 5V Battery Typ AA, IEC LR3 375 x 30 x 250mm 56 x 24 x 80mm Outdoor : Relative indoor humidity range Data checking intervals Indoor Temperature Indoor Humiditiy Outdoor temperature Power Supply World Time Center Temperature Sensor Dimensions (L x W x D) World Time Center Temperature Sensor Liability Disclaimer · · : : : : : : : : Subject Index Here the interested user will find a number of additional informations regarding the function of this Wallclock Weather Station. Their knowledge however is not necessary for efficient operation of this system. Clock, Radio Controlled The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any consequences that occur should any inaccurate reading take place. [. . . ]