User manual LA CROSS TECHNOLOGY WS-8054U

[. . . ] Model : WS-8054U 433 MHz Radio Controlled Temperature Alarm Instruction Manual FCC ID: OMO-01RX (receiver), OMOTX6U (transmitter) THIS DEVICE COMPLIES WITH PART 15 OF THE FCC R U L E S . O P E R AT I O N I S S U B J E C T TO T H E FOLLOWING TWO CONDITIONS: DATE INDOOR OUTDOOR RADIO CONTROLLED TIME SET + ALARM 1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND 2. THIS DEVICE MUST ACCEPT INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. R Contents Language English French Spanish Page 2 44 88 TABLE OF CONTENTS Topic Inventory of Contents/ Additional Equipment About WWVB Quick Set-Up Guide Detailed Set-Up Guide Battery Installation Program Mode Function Buttons Time Zone Setting DST (Daylight Saving Time) Setting Language Selection Time Setting Calendar Setting Page 4 4 6 8 14 15 16 17 18 20 12/24-Hour Setting Selecting °F or °C Features & Operations Changing Display Mode (viewing seconds) The Alarm Indoor temperature Remote Temperature E. L. [. . . ] 4) The default month "1" will flash. Press and release the "+" button to select the appropriate month. 5) Press and release the "SET" button to confirm the month and to move to select the date. 6) The default date "1" will flash. Press and release the "+" button to select the appropriate date. 7) Press and release the "SET" button to confirm the date and to move to select the weekday. 8) The default weekday "MON" (depends on selected language) will flash. Press and release the "+" button to select the appropriate weekday. 9) Press and release the "SET" button to confirm the calendar settings and to advance to select either 12 or 24-hour time display. VII) 12/24-HOUR SETTING 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press and release the "SET" button 9 more times until the "12" hour time display flashes in the time LCD. P. 21 GB P. 20 GB 2) Press and release the "+" button to toggle between 12 and 24 hour time. 3) Press and release the "SET" button to confirm the 12/24-hour time display and to advance to select either °F or °C. VIII) SELECTING °F OR °C 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press and release the "SET" button 10 more times until the default "°F" flashes in the time LCD. 2) Press and release the "+" button to toggle between °F and °C. 3) Press and release the "SET" button to confirm the °F or °C selection and exit the Program Mode. FEATURES & OPERATIONS I) CHANGING DISPLAY MODE (DAY, SECONDS, AND TEMPERATURE) There are three possible display modes to view the day, seconds, and temperature. The month & date/ weekday /indoor temperature/remote temperature is the default. To change the display: 1) Press and release the "+" button. 2) The display should now show the month&date/ seconds/indoor temperature/ remote temperature 3) Press and release the "+" button a second time. 4) The display will now show the month&date/weekday/ seconds/remote temperature P. 23 GB P. 22 GB 5) Press and release the "+" button a third time and the display will return to the normal display. II) THE ALARM 1) SETTING THE ALARM Note: The duration of the alarm is 85 seconds. After each of the first two 25 second periods, the rate of the alarm increases. (a) Hold down the "ALARM" button for 5 seconds. [. . . ] La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty. [. . . ]