User manual LA CROSS TECHNOLOGY WS-8418U-IT

[. . . ] WS-8418U-IT ATOMIC CLOCK WITH OUTDOOR WIRELESS TEMPERATURE AND MOON PHASE Instruction Manual This product offers: INSTANT TRANSMISSION is the state-of-the-art new wireless transmission technology, exclusively designed and developed by LA CROSSE TECHNOLOGY. INSTANT TRANSMISSION offers you an immediate update (every 4 seconds!) of all your outdoor data measured from the transmitters: follow your climatic variations in real-time! · · · · · · · · · · · · · WWVB Radio controlled time with manual time setting 12/24 hour time display Time display: hour, minute, second optional Alarm setting with snooze function Calendar display Weekday display (4 languages to choose from: English, French, Spanish, and German) Time zone setting Daylight savings time ON/OFF option (DST) ºF or ºC temperature display selectable Indoor temperature display Outdoor temperature display via 915MHz transmission Wall mount or freestanding Current moon phase display OUTDOOR TEMPERATURE SENSOR: · FEATURES: ATOMIC CLOCK: Hanging holes Holder LCD1 display · Remote transmission of outdoor temperature to the atomic clock by 915 MHz signals Wall mounting case TO INSTALL AND REPLACE BATTERIES IN THE ATOMIC CLOCK Battery cover LCD2 display Function keys Foldable stand The atomic clock uses 2 x AA, 1. 5V batteries. To install and replace the batteries, please follow the steps below: 1. Insert finger or other solid object in the space at the bottom center of the battery compartment and lift up to remove the cover. [. . . ] Press and release the SET key to enter the "ºF/ºC Temperature Setting". DATE SETTING TO DEACTIVATE THE ALARM: Alarm icon (((·))) (ON) 2. 2. WEEKDAY SETTING The alarm will be automatically ON when the alarm time is set. To deactivate the alarm (OFF), press and release once the ALM key in normal mode display. The alarm icon will disappear, the alarm is now off. 12/24 HOURS TIME DISPLAY SETTING SNOOZE SETTING The snooze can only be activated during alarm time for a snooze duration of 10 minutes by pressing the SNZ key on the back of the clock OUTDOOR TEMPERATURE SENSOR: The temperature is measured and transmitted to the atomic clock every 4 seconds. The atomic clock will update the outdoor temperature display every 4 seconds. The range of the outdoor temperature sensor may be affected by the temperature. At cold temperatures, the transmitting distance may be decreased. Please bear this in mind when positioning the sensor. Also, the batteries may be reduced in power during periods of extreme cold temperatures. °F OR °C TEMPERATURE SETTING 1. The characters "°F" or "°C" will start flashing on LCD1 (Default setting °F). Using the + key, select "°C" for temperature display in degrees Celsius or "°F" for degrees Fahrenheit. Press and release the SET key to exit the setting mode and switch back to the normal display mode. To return to the normal display mode from anywhere in manual setting mode simply press the SNZ key anytime. EXIT THE MANUAL SETTING MODES · 7 8 915MHz RECEPTION CHECK FOR OUTDOOR TEMPERATURE SENSOR The atomic clock will receive the temperature data within 3 minutes. If the temperature data is not being received 3 minutes after setting up (the display shows "- - -"), then please check the following points: 1. The distance of the atomic clock or outdoor temperature sensor should be at least 6 feet (2 meters) away from any interfering sources such as computer monitors or TV sets. Avoid placing the receiver onto or in the immediate proximity of metal window frames. Using other electrical products such as headphones or speakers operating on the same signal frequency (915MHz) may prevent correct signal transmission and reception. Neighbors using electrical devices operating on the 915MHz signal frequency can also cause interference. Note: When the 915 MHz signal is received correctly, do not re-open the battery cover of either the outdoor temperature sensor or atomic clock, as the batteries may spring free from the contacts and force a false reset. Should this happen accidentally then reset all units (see Setting up above) otherwise transmission problems may occur. The maximum transmission range is 330 feet (100 meters) from the outdoor temperature sensor to the atomic clock (in open space). However, this depends on the surrounding environment and interference levels. [. . . ] Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd's authorized service center. La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. [. . . ]