User manual LA CROSS TECHNOLOGY WS 9016U

[. . . ] WS-9016U Wireless 433 MHz Radio-controlled Sun/Moon Weather Station Instruction Manual Topic Inventory of Contents/Additional Equipment About WWVB Quick Set-Up Guide Detailed Set-Up Guide Battery Installation Program Mode Function Keys LCD Screen Manual Settings Sequence LCD Contrast Setting City Location Setting Time Zone Setting Daylight Saving Time (DST) Setting WWVB On/Off Setting 12/24 Hour Setting Manual Time Setting Calendar Setting Snooze Setting ºF/ºC Setting Weather Forecast Icon Sensitivity Setting Features Alarm Setting Sunrise/set ­ Moonrise/set Information Moon Phase Symbols Indoor Temperature and Humidity Weather Forecast and Tendency Outdoor Temperature Adding Remote Temperature Sensors Set-up of Multiple Remote Temperature Sensors Mounting City List Troubleshooting Maintenance & Care Specifications Warranty Information Page 3 4 5 6 7-8 9 9 10 10 11 11 12 12 13 14 15 15 16 16-17 17-18 18 18 19-20 20-21 21-22 22 22-24 25 26 27 28 29-30 2 Table Of Contents INVENTORY OF CONTENTS 1. 5. Time LCD Sun/moon LCD Indoor LCD Forecast LCD Outdoor LCD Battery compartment The indoor weather station (Figure 1). One TX6U remote temperature sensor with mounting bracket (Figure 2). Three each, ½" Philips screws. [. . . ] 4. 5. The sunrise/sunset and moonrise/moonset time for each of the preset cities can be displayed by pressing the "SUN/MOON" button. Press and release the PLUS (+) or MINUS (-) button to choose any city from the list. The small dot next to the city name will start flashing. Press and release the "SET" button to confirm the city and choose a date (year/month/day) for sun/moon calculation by pressing and releasing the PLUS (+) or MINUS (-) button. Press and release the "SET" button after selection of the day to start calculation of the sun/moon data. 17 Note: It will take a few seconds until the sun/moon data will be displayed. The display will return after 3 minutes to normal mode. The "CH" button can also be used to return immediately to the normal display mode. If only a specific data is changed, e. g. only a different city is selected, the "SUN/MOON" button can be pressed to start the calculation. Note: Due to topographic variation of the landscape (hills, valleys) there might be small differences between the sunrise/sunset moonrise/moonset time displayed and the actual sunrise/sunset moonrise/moonset time. Moon Phase Symbols The moon icon of the weather station will also display all 12 moon phases throughout the year accordingly to the set calendar. Full Moon Waning Gibbous Last Quarter Waning Crescent New Moon Waxing Crescent First Quarter Waxing Gibbous Note: It may happen that there is no moonrise or moonset on a certain date, consequently "+1" above the moonrise or moonset time will be displayed to indicate that it will occur at the displayed time the next day. Indoor Relative Humidity and Indoor Temperature The indoor temperature and humidity data are automatically updated and displayed on the third section of the LCD. Indoor relative humidity in RH% Indoor temperature in °F or ºC WEATHER FORECAST AND WEATHER TENDENCY: 18 WEATHER FORECASTING ICONS: Note: The weather forecast icons of this indoor weather station are a prediction of what the weather is going to do in the next 12 to 20 hours. These are not indications of the current weather. Weather icons in the fourth section of LCD can be displayed in any of the following combinations: Sunny Cloudy with sunny intervals Rainy For every sudden or significant change in the air pressure the weather icons will update accordingly to represent the change in weather. If the icons do not change, then it means either the air pressure has not changed or the change has been too slow for the indoor weather station to register. However, if the icon displayed is a sun or raining cloud, there will be no change of icon if the weather gets any better (with sunny icon) or worse (with rainy icon) since the icons are already at their extremes. The icons displayed forecasts the weather in terms of getting better or worse and not necessarily sunny or rainy as each icon indicates. For example, if the current weather is cloudy and the rainy icon is displayed, it does not mean that the product is faulty because it is not raining. This simply means that the air pressure has dropped and the weather is expected to get worse but not necessarily rainy. Note: After setting up, readings for weather forecasts should be disregarded for the next 12-24 hours. This will allow sufficient time for the indoor weather station to collect air pressure data at a constant altitude and therefore result in a more accurate forecast. Common to weather forecasting, absolute accuracy cannot be guaranteed. [. . . ] This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd's authorized service center. [. . . ]