User manual LA CROSS TECHNOLOGY WS-9029U

[. . . ] WS-9029U 915 MHz WIRELESS WEATHER STATION INSTRUCTION MANUAL CONTENTS 03 03 04 05 06 06 08 09 10 10 10 introduction features quick set up guide detailed set up guide function keys operations mounting troubleshooting maintenance and care specifications warranty information 2 This product offers: INSTANT TRANSMISSION is the state-of-the-art new wireless transmission technology, exclusively designed and developed by LA CROSSE TECHNOLOGY. INSTANT TRANSMISSION offers you an immediate update (every 4 seconds!) of all your outdoor data measured from the sensors: follow your climatic variations in real-time! 12 or 24 Hour Time Display Indoor Temperature (°F or °C) Indoor Humidity (%RH) Channel Indicator (1, 2, or 3) Outdoor Temperature (°F or °C) Minimum or Maximum Temperature & Humidity Set/ Channel Button Minimum/Maximum/+ Button Connection w/ Sensor Icon Low Battery Indicator FIGURE 1 FEATURES · Wireless Weather Station (Figure 1). · Remote Temperature Sensor with optional Channel 2 Probe (TX25U, Figure 2). · Indoor Temperature (°F or °C) and Indoor Humidity. [. . . ] The minimum records will display for 30 seconds before returning to the normal display mode. Press the min/max/+ button again (once while "MIN" is still displayed, twice otherwise). "MAX" appears in the bottom right of the LCD. The indoor and outdoor temperatures displayed when "MAX" appears are the maximum recorded values. The maximum records will display for 30 seconds before returning to the normal display mode. While "MAX" is still displayed press the min/max/+ button again to return to the current data display. Or you can wait 30 seconds, during either the minimum or the maximum readings, and the unit will automatically return to current data readings. RESETTING THE MIMIMUM AND MAXIMUM RECORDS All the minimum and maximum records (minimum and maximum) will be reset after the min/max/+ button is pressed and held for 5 seconds. OPTIONAL CHANNEL 2 TEMPERATURE PROBE When the temperature probe is connected to the remote temperature sensor, the WS-9029U's channel 1 will display the remote temperature sensor data, and channel 2 will display the temperature probe data. The remote temperature sensor data will always be displayed on the channel 1 and the temperature probe on the channel 2. If the probe on remote temperature sensor is unplugged, the "probe channel" on WS-9029U LCD will show "---", the remote temperature sensor displayed value will still be shown. The probe can be connected to the remote temperature sensor anytime. The Weather Station will automatically detect the temperature probe and will display the temperature probe data in channel 2. ADDING TEMPERATURE SENSORS (OPTIONAL) The WS-9029U is able to receive signals from 2 remote temperature sensors (TX-25U). These extra sensors can be purchased through the same dealer as this unit A. Remove all the batteries from the receiver and sensor(s) and wait 60 seconds. During these 60 seconds, press any button 20 times to discharge any excess power. Insert the batteries to the first sensor. Within 2 minutes of powering up the first sensor (Temperature sensor with probe), insert the batteries to the Weather Station. Once the batteries are in place, all segments of the LCD will light up briefly. Following the indoor temperature/humidity and the time as 12:00 will be displayed, and the signal reception icon will flash. If they are not shown in LCD after 60 seconds, remove the batteries and wait for at least 60 seconds before reinserting them. [. . . ] The owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd product to a La Crosse Technology, Ltd authorized service center. La Crosse Technology, Ltd will pay ground return shipping charges to the owner of the product to a USA address only. Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the following specified exceptions: (1) damage caused by accident, unreasonable use or neglect (including the lack of reasonable and necessary maintenance); (2) damage occurring during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of, any accessory or decorative 14. 1°F to 139. 8°F with 0. 1°F resolution. "OFL" displayed if outside this range. [. . . ]