User manual LA CROSS TECHNOLOGY WS-9160U-IT

[. . . ] Contents Language Page ____________________________________________________________________________ English French Spanish 1 29 Topic Inventory of Contents Features Setting Up Battery Installation Function keys LCD Screen and Settings Manual Settings Viewing the minimum and maximum records Ressetting the minimum and maximum records 915 MHz Reception Mounting Care and Maintenance Specifications Warranty Information Page 2 3 7 9 11 13 24 24 27 28 31 32 33 1 2 FEATURES: The Temperature Station This product offers: INSTANT TRANSMISSION is the state-of-the-art new wireless transmission technology, exclusively designed and developed by LA CROSSE TECHNOLOGY. INSTANT TRANSMISSION offers you an immediate update (every 4 seconds!) of all your outdoor data measured from the sensors: follow your climatic variations in real-time! LCD Display Hanging hole Battery compartment cover INVENTORY OF CONTENTS 1. Wireless Outdoor Temperature Transmitter (TX29U-IT) and mounting bracket 3. Instruction Manual. Function Keys Foldout stand 3 4 · · · · · · · · Quartz clock in 12 or 24-hour time display (hour and minute, manually set) Indoor and outdoor temperature reading in degrees Fahrenheit (°F) or Celsius (°C) Display of MIN/MAX records of indoor temperature and outdoor temperature Can receive up to three outdoor transmitters Wireless transmission at 915 MHz Signal reception intervals at 4 seconds Low battery indicator Wall mounting or table standing (foldout table stand) SETTING UP: When one transmitter is used: 1. [. . . ] + key (Plus) · To make adjustments for manual settings. Set Key Channel key CH key (Channel) · To toggle between the Outdoor transmitters 1, 2 and 3 (if more than 1 transmitter is used) + key Min/max key 11 12 LCD Screen and settings: Time *When the signal is successfully received by the Temperature Station, this icon will be switched on. (If not successful, the icon will not be shown in LCD) So the user can easily see whether the last reception was successful (icon on) or not (icon off). On the other hand, the short blinking of the icon shows that a reception is being done now. For better distinctness the LCD screen is split into 3 sections displaying the information for time, indoor temperature, and outdoor temperature. Section 1 - TIME · Display of time. Indoor Temperature in °F/°C Outdoor Temperature in °F/°C Sensor identification No. (shown when more than one sensor is used) Receiver Low battery indicator Section 2 - INDOOR TEMPERATURE · Display of indoor temperature Section 3 - OUTDOOR TEMPERATURE · Display of the outdoor temperature Outdoor Reception Signal icon* Transmitter Low battery indicator 13 14 MANUAL SETTING: 12/24- HOUR TIME DISPLAY SETTING AND TEMPERATURE UNIT (°C/°F) SETTING To display the time in 12-hour or 24-hour mode (default setting: 12h): MANUAL TIME SETTING Set the time of Temperature Station by the following steps: Minutes (flashing) Flashing Hours (flashing) 1. In normal display mode, press and hold the SET key for about 3 seconds. The "12h" or "24h" digit will be flashing. Press the + key to set the desired time display mode. Press shortly the SET key to advance to the MANUAL TIME SETTING. 4. The hour digit of the time display will be flashing. Press the + key to adjust the hour (Press and hold to allow fast advancing). Press SET key to confirm and go to the minute setting. Press the + key to adjust the minute (Press and hold to allow fast advancing). Press SET key once more to return to normal display. Note: When the time display is set as 12-hour mode, the temperature unit will be fixed to °F; when the time mode is in 24-hour, the temperature unit will be fixed to °C. 15 VIEWING THE MINIMUM AND MAXIMUM RECORDS: To view the MIN/MAX indoor and outdoor temperature records: 1. Press the MIN/MAX key once to view the minimum indoor and outdoor temperature. 3. Press the MIN/MAX key once more to view the maximum indoor and outdoor temperature. Press the MIN/MAX key to return to current temperature display. Note: The transmitter number will only be displayed if more than one transmitter is used. RESETTING THE MINIMUM AND MAXIMUM RECORDS: To reset the MIN/MAX records: 1. Press the MIN/MAX key once to display the min record. Press and hold the MIN/MAX key again for about 3 seconds to reset all the minimum/ maximum data to the current temperature values. [. . . ] To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd's authorized service center. La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. [. . . ]