User manual LA CROSS TECHNOLOGY WS-9210U

[. . . ] WS-9210U Wireless 433 MHz Radio-controlled Temperature Station Instruction Manual Topic Inventory of Contents/Additional Equipment About WWVB Quick Set-Up Guide Detailed Set-Up Guide Battery Installation Program Mode Programming Sequence Function Keys 12/24 Hour Time Setting Time Zone Setting Daylight Saving Time Setting Time Setting (WWVB & Manual) Setting Day, Date and Year Selecting °F or °C Setting the LCD Contrast Features Indoor Temperature Outdoor Temperatures Minimum & Maximum Records (Indoor, Outdoor & Resetting) Alarm (Setting, Snoozing & Stopping) Additional Remote Temperature Sensor Units (Set-Up, Viewing & Operation) Mounting Troubleshooting Maintenance & Care Specifications Warranty Information Page 3 4 5 6 7 7 7-8 8 8-9 9-10 10 11 11 12 12 13 14 14-15 16-17 18 18 19 19-21 2 Table Of Contents INVENTORY OF CONTENTS 1. One TX6U remote temperature sensor with mounting bracket Three each, ½" Philips screws. (Figure 2). Time LCD Date LCD Indoor LCD Outdoor LCD Figure 2 Wireless Temperature Sensor Figure 1 *LCD = Liquid Crystal Display ADDITIONAL EQUIPMENT (not included) 1. 3. Two, fresh AA 1. 5V batteries for indoor weather station. [. . . ] "MAX" appears above the indoor temperature in the INDOOR LCD indicating that the maximum temperature and the time and date of occurrence are displayed. While "MAX" is still displayed press the "IN" button again to return to the current data display. By waiting 20 seconds during either the minimum or the maximum readings the unit will automatically return to current data readings. VIEWING THE OUTDOOR TEMPERATURE RECORDS Press the "OUT" button once. "MIN" appears above the outdoor temperature in the OUTDOOR LCD, indicating that the minimum temperature and the time and date of occurrence are displayed. The minimum records will display for 20 seconds. Press the "OUT" button again (once while "MIN" is still displayed, twice otherwise). "MAX" appears above the outdoor temperature in the OUTDOOR LCD, indicating that the maximum temperature and the time and date of occurrence are displayed. While "MAX" is still displayed press the "OUT" button again to return to the current data display. By waiting 20 seconds during either the minimum or the maximum readings the unit will automatically return to current data readings. RESETTING THE MIMIMUM AND MAXIMUM RECORDS All the indoor records (minimum and maximum) will be reset after the "IN" button is pressed and held for 5 seconds. All the outdoor records (minimum and maximum) will be reset after the "OUT" button is pressed and held for 5 seconds. 2. 3. B. SETTING THE ALARM (alarms 1 and 2) Note: There are two alarms that can set. Each alarm will sound for a complete duration of 2 minutes. Press and hold the "AL1" button for 5 seconds or until the alarmtime display flashes in the DATE LCD. Press and release the "IN" button to set the alarm hours, press and release the "OUT" button to set the alarm minutes. Press the "AL1" button or wait 15 seconds for the unit to automatically confirm the alarm time and return to display the date in the DATE LCD as normal. The ((1)) icon, appearing in the DATE LCD, indicates that the alarm is set to sound at the programmed time. Programming the alarm time automatically activates the alarm to sound at the programmed time. To deactivate the alarm, press the "AL1" button (removing the ((1)) icon from the screen). To reactivate the alarm, press the "AL1" button again. After each activation or deactivation, the programmed alarm time is displayed. [. . . ] The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd's authorized service center. 19 La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty. [. . . ]