User manual LA CROSS TECHNOLOGY WS-9520U

[. . . ] WEATHER PROJECTION STATION Instruction Manual INTRODUCTION: Congratulations on purchasing this state-of-the-art weather projection station as an example of innovative design and quality piece of engineering. Providing radio controlled time, date, calendar, moon phase, indoor and outdoor temperature, indoor and outdoor relative humidity, this unit will never keep you guessing on current and future weather conditions. Operation of this product is simple and straightforward. By reading this operating manual, the user will receive a better understanding of the weather projection station together with the optimum benefit of all its features. [. . . ] Use the CH/+ key to toggle between "12H" or "24H". Confirm with the SET key and enter the Manual time setting. MANUAL TIME SETTING: In case the weather projection station cannot detect the WWVB-signal (for example due to disturbances, transmitting distance, etc. ), the time can be manually set. The clock will then work as a normal Quartz clock. Hour flashing 9 Minutes flashing 1. 5. The hour digit will start flashing. Press again the SET key to set the minutes. Confirm with the SET key and enter the Calendar setting. Note: The unit will still try to receive the signal between 12:00 to 6:00 a. m. every day even if the time has been manually set and if the WWVB time reception function has been set ON. When it does receive the signal, it will change the manually set time into the received time. During reception attempts the WWVB tower icon will flash. If reception has been unsuccessful, then the WWVB tower icon will not appear but reception will still be attempted the following hour. CALENDAR SETTING: The date default of the weather projection station is 1. Once the radio-controlled time signals are received, the date is automatically updated. However, if the signals are not received, the date can also be set manually. Use the CH/+ key to set the year (between year 2003-2029). Press the SET key again to confirm and to enter the month setting. Press the SET key again to confirm and to enter the date setting mode. Confirm all calendar settings with the SET key and enter the Snooze setting. SNOOZE SETTING: Snooze time The snooze time can be set OFF to a maximum time of 30 minutes (default is 10 minutes): 1. Use the CH/+ key to set the snooze time. Each pressing of the key will increase the snooze time by 5 minutes. The snooze can also be set OFF when the "OFF" digit is being displayed. Confirm with the SET key and enter the Temperature setting Note: If the snooze time has been set "OFF", the snooze function will not be activated. °F/°C TEMPERATURE SETTING: Digit flashing 10 The temperature display can be selected to show temperature data in °F or °C (Default °F). Use the CH/+ key to toggle between "°F" or "°C". Confirm with the SET key and enter the Weather forecasting icon sensitivity setting. WEATHER FORECASTING ICON SENSITIVITY SETTING: Digit flashing Icons flashing For locations with rapid changes of weather conditions, the weather icons can be set to a different level for faster display of weather conditions. [. . . ] La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty. [. . . ]