User manual LA CROSS TECHNOLOGY WS-9611U

[. . . ] WIRELESS WEATHER STATION WITH ADVANCED FORECAST ICON Instruction Manual Thank You and Congratulations on selecting a La Crosse Technology Wireless Weather Station!We are positive you will enjoy the benefits of accurate weather readings and the precise, radio-controlled time information that our instruments offer. La Crosse Technology introduced radio controlled clocks to the US market in 1991, and continues to be on the cutting-edge of this technology in America. This manual will guide you step-by-step through setting up your La Crosse Technology device. [. . . ] Confirm with the SET key and enter the Temperature setting. Note: If the snooze time has been set OFF, the snooze function will not be activated. °F/°C TEMPERATURE UNIT SETTING The temperature display can be selected to show temperature data in °F or °C (Default °F): flashing 66 1. 2. Use the CH/+ key to toggle between °F or °C. Confirm with the SET key and enter the Weather forecasting icon sensitivity setting. WEATHER FORECASTING ICON SENSITIVITY SETTING For locations with rapid changes of weather conditions, the weather icons can be set to a different level for faster display of weather conditions. flashing flashing 1. The current sensitivity value will start flashing 67 2. 3. Use the CH/+ key to set the weather sensitivity level. There are 3 levels of setting: 1, 2 and 3; level 1 is the most sensitive setting; level 3 is the slowest recording setting (default setting is 2). Confirm with the SET key and exit the Manual settings. Alarm icon ALARM SETTING: flashing The alarm time can be set when pressing the ALM key: 1. Press the ALM key until the alarm hour digits flash. Press the ALM key again so the minute digits flash. Use the CH/+ key to set the alarm minutes. Confirm with the ALM key, or SNOOZE key and exit the Alarm setting. 68 Note: The maximum alarm ring duration is 2 minutes. The alarm setting can be activated or deactivated manually by pressing the ALM key. The alarm icon will be displayed on the LCD if the setting is activated SNOOZE SETTING AND STOPPING THE ALARM: The snooze function can be activated when the alarm is ringing by pressing the SNOOZE key. However the snooze will only be activated when the snooze time is set other than OFF in snooze setting. When the alarm is snoozing, the alarm icon will start flashing indicating that the alarm is active but is in Snooze mode. To stop the snooze function when it is in snooze period, press and release any of the SET, MIN/MAX, or CH/+ keys. To turn the alarm on and off, press and release the ALM key. The alarm icon will appear when the alarm is activated and won't show when the alarm is deactivated WEATHER FORECAST ICONS: The weather forecast can be displayed as follow: Sunny Sun w/ Clouds Rainy 69 Note: After initial set up, allow 48-60 hours for your Wireless Weather Station to acclimate to the local pressure. For every sudden or significant change in the air pressure, the weather icons will update accordingly to represent the change in weather. If the icons do not change, then it means either the air pressure has not changed or the change has been too slow for the wireless weather station to register. However, if the icon displayed is a sun or raining cloud, there will be no change of icon if the weather gets any better (with sunny icon) or worse (with rainy icon) since the icons are already at their extremes. The icons displayed forecasts the weather in terms of getting better or worse and not necessarily sunny or rainy as each icon indicates. For example, if the current weather is cloudy and the rainy icon is displayed, it does not mean that the product is faulty because it is not raining. [. . . ] Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty. If necessary repairs are not covered by this warranty, or if a product is examined which is not in need or repair, you will be charged for the repairs or examination. The owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd product to a La Crosse Technology, Ltd authorized service center. [. . . ]