User manual LA CROSS TECHNOLOGY WS-9640U-IT

[. . . ] Contents Language Page ___________________________________________________________________ English French Spanish 1 35 37 1 TABLE OF CONTENTS Topic Inventory of Contents Features Setting Up Battery Installation Function keys LCD Screen and Settings Atomic time -WWVB Radio Controlled Time Manual Settings Weather Forecast and Tendency Display of Indoor Temperature and Humidity Reading Display of Outdoor Temperature Reading Display of Outdoor Minimum and Maximum records Display of Indoor Minimum and Maximum records Ice Alarm 915 MHz Reception Mounting Care and Maintenance Specifications Warranty Information Page 3 4 6 8 10 12 14 15 20 22 22 23 24 26 27 28 31 32 33 2 This product offers: INSTANT TRANSMISSION is the state-ofthe-art new wireless transmission technology, exclusively designed and developed by LA CROSSE TECHNOLOGY. INSTANT TRANSMISSION offers you an immediate update (every 4 seconds!) of all your outdoor data measured from the transmitters: follow your climatic variations in real-time! INVENTORY OF CONTENTS 1. Wireless Weather Station Wireless Temperature Sensor (TX29U) and mounting bracket. Instruction Manual and Warranty Card. ADDITIONAL EQUIPMENT (not included) 1. [. . . ] Confirm with the SET key and enter the "Manual Time setting" or exit the setting mode by pressing the CH key. 13 MANUAL TIME SETTING In case the Weather Station is not able to detect the Atomic time (WWVB) signal (disturbances, transmitting distance, etc. ), the time can be manually set. The clock will then work as a normal Quartz clock. Hours (flashing) Minutes (flashing) To set the clock: 1. The hour digits start flashing in the time display section. Use the + key to adjust the hours and then press SET key to go to the minute setting. Confirm with the SET key and enter the "Calendar Setting" or exit the setting mode by pressing the CH key Note: · · The unit will still try to receive the signal at each full hour despite it being manually set. When it does receive the signal, it will change the manually set time into the received time. The time format is fixed to "12-hr" time display. "PM" will be shown in hours from noon to midnight. CALENDAR SETTING Year 14 "Month. Date. " weekday The date default of the Weather Station is 1. Once the radio-controlled time signals are received, the date is automatically updated. However, if the signals are not received, the date can also be set manually. The range runs from 2000 to 2029 (default is 2006). Press the SET key to enter the month setting mode. Press the + key to set the month and then press the SET key to go to the date setting. Confirm with the SET key and set the weekday. Press + key to select the weekday, "MO", TU", "WE" etc. Confirm with SET key and enter the "°F/°C TEMPERATURE UNIT SETTING" or exit the setting mode by pressing the CH key. °F/°C TEMPERATURE UNIT SETTING flashing The default temperature reading is set to °F (Fahrenheit). 18 RESETTING THE INDOOR AND OUTDOOR MINIMUM AND MAXIMUM RECORDS 1. In normal display mode, press the MIN/ MAX button to advance to the MIN/MAX records display. Press and hold the MIN/MAX key for about 2 seconds, this will reset all the indoor and outdoor MIN and MAX temperature records to the current temperature and time. Note: The indoor and outdoor records will be reset at the same time. [. . . ] To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd's authorized service center. La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective 24 during the limited warranty period specified above. [. . . ]