User manual LA CROSS TECHNOLOGY WT-5600

[. . . ] WT-5600 Radio Controlled Projection Alarm Instruction Manual PROJECTION TABLE OF CONTENTS Topic Inventory of Contents About WWVB Quick Set-Up Guide Detailed Set-Up Guide Battery Installation Program Mode Programming Sequence Function Buttons Time Zone Setting Time Setting Date Setting 12/24-Hour Mode DST (Daylight Saving Time) Setting Features & Operations Features Radio-Controlled Time Projection LCD light Time Alarm Changing Display Mode Maintenance & Care Troubleshooting Specifications Warranty and Contact Information Page 3 3 4 5 6 6 6-7 7 8 8 8 8-9 9 10 10 10-11 12 12 13 13 14 2 INVENTORY OF CONTENTS 1) WT-5600 Alarm Clock 2) AC adapter/transformer 3) Instruction manual and warranty card. ADDITIONAL EQUIPMENT (not included) 1) Two fresh 1. 5V AA batteries (optional for alarm clock) FEATURES OF PROJECTION ALARM 1. Radio-controlled time and date Projection of time LCD light Three modes of date/second display Alarm ABOUT WWVB (Radio Controlled Time) The NIST (National Institute of Standards and Technology--Time and Frequency Division) WWVB radio station is located in Ft. Collins, Colorado, and transmits the exact time signal continuously throughout the United States at 60 kHz. [. . . ] Press the "MODE/+" button to select the month. Press the "AL" button to confirm the month and move to the day setting. Press the "MODE/+" button to select the day. Press the "AL" button to confirm the day and move to the 12/24 Hour display setting, or press the "SNOOZE" button to confirm the date and return to the display mode. F. Hold down the "MODE/+" button for 2 seconds (the selected time zone will flash), press the "AL" button six times until " :12" flashes in the time display. Press the "MODE/+" button to toggle between 12 and 24-hour time display. Press the "AL" button to confirm the time display setting and move to the Daylight Saving Time setting, or press the "SNOOZE" button to confirm the time display setting and return to the display mode. 2. DAYLIGHT SAVINGS TIME Note: The DST default is "On", meaning that the WWVB will automatically change the time according to Daylight Saving Time in the spring and fall. For areas that do not recognize DST changes (Arizona and parts of Indiana) turn the DST to "OFF". Hold down the "MODE/+" button for 2 seconds (the selected time zone will flash), press the "AL" button seven times until "ON" flashes in the date display area and "DST" flashes above the U. S. Press the "MODE/+" button to toggle between "ON" and "OFF" modes. Press the "AL" button to confirm the DST setting and complete the set-up. Radio-controlled time and date Projection of time LCD light Three modes of date/seconds display Time alarm 8 B. The projection alarm will automatically search for the time signal upon initial set-up and every night. When the signal is being received, there will be a "tower" icon flashing to the right of the time display. When the time signal has been received successfully, the tower icon will remain steady until midnight. The NIST (National Institute of Standards and Technology--Time and Frequency Division) WWVB radio station is located in Ft. Collins, Colorado, and transmits the exact time signal continuously throughout the United States at 60 kHz. The signal can be received up to 2, 000 miles away through the internal antenna in the Projection Alarm. Due to the nature of the Earth's Ionosphere, reception is very limited during daylight hours. The Projection alarm will search for a signal every night when reception is best. The WWVB radio station receives the time data from the NIST Atomic clock in Boulder, Colorado. [. . . ] Problem: 1) Be sure correct time zone and daylight saving time are Solution: selected. Note: For any questions not answered, please contact La Crosse Technology's Technical Support with the contact information found at the end of this instructional manual. SPECIFICATIONS FOR WT-5720 Power source: AC Adapter (included) Battery type: Battery life: Dimensions (L x W x H): Input: 120VAC/60Hz Output: DC 6V/100MA Station: 2 x AA, 1. 5V (Alkaline) (optional) Approximately 12 months, depending on projection and light use 5. 25"W x 3. 75"H x 1. 25"L 13 WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. [. . . ]