User manual LA CROSS TECHNOLOGY WT-992BLK

[. . . ] Hours and Minutes are shown using the analog display. Date and Seconds are shown in the digital LCD. [. . . ] If the reception is disturbed (ex: close proximity to metallic objects or electric appliances), the watch will automatically try several times to receive the WWVB signal. ADJUSTING THE HANDS If the time is displayed incorrectly despite successful WWVB signal reception, the hands may have been moved by mechanical influences and will need to be adjusted manually. Press and hold the PUSH-PIECE for about 4 seconds. The hands will move towards the 12:00 position. 9 2. If the hands do not stop at the 12:00 position, press and release the RECESSED BUTTON one time. Press and release the RECESSED BUTTON several times to advance the big hand in small steps until the hands are set exactly to the 12:00 position. To exit this setting, press and release the PUSH-PIECE. The watch automatically adjusts to the manually set time and attempts to receive the WWVB signal. After successful WWVB signal reception, the time will be set automatically. a. SETTING TIME ZONE You may select your time zone manually. 10 1. Press and hold the RECESSED BUTTON for about 4 seconds. The current hour is shown at the left of the display. The right side displays the current time zone selection. 2. Press and release the PUSH-PIECE until you see your desired time zone. Time City Difference HA Honolulu P Los Angeles 11 M C E -3 0 +1 +2 +3 +4 +5 +7 +8 +9 +10 Denver Chicago, Mexico City New York, Toronto Rio de Janeiro, Buenos Aires London Paris, Rome, Berlin, Hamburg Cairo, Helsinki, Johannesburg Moscow Dubai Karachi Bangkok Hong Kong Tokyo Sydney 12 3. Once you have selected your correct time zone, to exit this setting press and release the RECESSED BUTTON or wait about 15 seconds without pressing any buttons and the watch will automatically return to its normal display setting. Warranty La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem 13 determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd's authorized service center. [. . . ] For warranty work, technical support, or information contact: La Crosse Technology, Ltd 2809 Losey Blvd. La Crosse, WI 54601 17 Phone: 608. 782. 1982 Fax: 608. 796. 1020 e-mail: support@lacrossetechnology. com (warranty work) sales@lacrossetechnology. com (information on other products) web: www. lacrossetechnology. com 18 All rights reserved. [. . . ]