User manual LA CROSSE TECHNOLOGY 404-1210S

[. . . ] The clock receives the time signal via its built-in antenna and adjusts automatically to the selected time zone. Once the correct time is set, the clock continues running with an internal quartz-controlled mechanism. The internal quartz-mechanism is very accurate; therefore, it does not matter if the clock is occasionally, unable to receive the time signals. When the tower icon flashes, but does not set the time or the WWVB tower does not appear at all, take note of the following: Recommended distance to any interfering sources like computer monitors or TV sets is a minimum of 6 feet (2 meters). [. . . ] Press and release the MODE/SET button to confirm and continue to the next menu item. Hour Flashes 12:04 05 12:07 12:09 2007 1M 1D 48 Minutes Flash MINUTES: The minutes will flash. Press and release the PLUS button or the MINUS button to adjust the minutes. Press and release the MODE/SET button to confirm and continue to the next menu item. SECONDS: The seconds will flash. Press and release the PLUS button or the MINUS button to adjust the seconds. Press and release the MODE/SET button to confirm and continue to the next menu item. 55 Seconds Flash YEAR: The year will flash. Press and release the PLUS button or the MINUS button to adjust the year. Press and release the MODE/SET button to confirm and continue to the next menu item. Year flashes DATE FORMAT: M and D will flash by the date. Press and release the PLUS button or the MINUS button to select the date displayed in Month/Day or Day/Month format. Press and release the MODE/SET button to confirm and continue to the next menu item. M & D flash MONTH: The month will flash. Press and release the PLUS button or the MINUS button to adjust the month. Press and release the MODE/SET button to confirm and continue to the next menu item. Month will flash 1M 1D 1M 1D DATE: The date will flash. POSITION THE CLOCK: When positioning the clock it is always best to have the front or the back facing Ft. Collins, Colorado for best WWVB signal reception. Wall Mount: Insert three screws (not included) into the desired wall, about 3. 9 inches (10 cm) apart. Leave the head of the screws extended out by about 0. 2" (5mm). Carefully hang the clock on the screws, using the hanging holes on the back of the clock. NOTE: Always ensures that the unit locks onto the screws before releasing. Table stand: Pull out the table-stand from the rear of the clock. Place on table or desk as desired. Wall Hanging Holes Function Buttons Battery Compartment Base Stand SPECIFICATIONS: Dimensions: 15. 35 inches H x 19. 09 inches W x 1. 57 inches D (39 cm H x 48. 5 cm W x 4 cm D) Power: Requires three "C" IEC LR14 alkaline batteries (not included). CARE AND MANITENANCE: Replace batteries promptly when needed. Important: Do Not Mix Old and New Batteries Do Not Mix Alkaline, Standard, or Rechargeable Batteries Remove batteries when clock is not in use or when in storage. Clean only with a soft cloth or paper towel. [. . . ] This warranty covers only actual defects within the product itself, and does not cover the cost of installation or removal from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the seller or performance variations resulting from installation-related circumstances. LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. This warranty gives you specific legal rights. [. . . ]