User manual LA CROSSE TECHNOLOGY K86326

[. . . ] Insert batteries observing the correct polarity (see marking). 4. The outdoor temperature and humidity data should be displayed on the weather station. If this does not happen after 2 minutes, the batteries will need to be removed from both units and reset from step 1. In order to ensure sufficient 915 MHz transmission however, the distance between the Weather Station and the transmitter should not be more than 330 feet (100 meters) (see notes on "Positioning" and "915 MHz Reception"). 2. Note: When changing batteries in the units, ensure the batteries do not spring free from the contacts. [. . . ] Confirm with the SET key and enter the Calendar setting. CALENDAR SETTING: Year * When the signal is successfully received by the weather station, the outdoor transmission icon will be switched on. (If not successful, the icon will not be shown on LCD). The user can then easily see whether the last reception was successful (icon on) or not (icon off). MANUAL SETTINGS: The following manual settings can be changed when pressing the SET key for: x 12/24 time display setting x Manual time setting x Calendar setting x ºF/ºC temperature display setting Date and month 12/24 HOUR TIME DISPLAY SETTING flashing The date default of the weather station is 1. Use the + key to set the year (between year 20112039). 5 6 3. 6. 7. Press the SET key again to confirm and to enter the month setting. Press the SET key again to confirm and to enter the date setting mode. Confirm all calendar settings with the SET key and "ºF/ºC temperature display setting". WEATHER FORECAST AND WEATHER TENDENCY: WEATHER FORECASTING ICONS: The weather icons in the second section of LCD can be displayed in any of the following combinations: °F/°C TEMPERATURE UNIT SETTING Sunny flashing Cloudy with sunny intervals Rainy The default temperature display is set to °F (degree Fahrenheit). The "°F or qC" will flash. Use the + key to toggle between "°C" and "°F". Once the desired temperature unit has been chosen, confirm with the SET key and exit the setting mode. For every sudden or significant change in the air pressure, the weather icons will update accordingly to represent the change in weather. If the icons do not change, then it means either the air pressure has not changed or the change has been too slow for the Weather station to register. 3. 4. Avoid placing the transmitters onto or in the immediate proximity of metal window frames. Using other electrical products such as headphones or speakers operating on the 915MHz-signal frequency may prevent correct signal transmission or reception. Neighbors using electrical devices operating on the 915MHz-signal frequency can also cause interference. Foldout table stand: The foldout table stand is located on the backside. Pull the stand out from the bottom center edge of the weather station, below the battery compartment. Once the foldout table stand is extended, place the weather station in an appropriate location. Note: When the 915MHz signal is received correctly, do not reopen the battery cover of either the transmitter or weather station, as the batteries may spring free from the contacts and force a false reset. Should this happen reset all units (see "Set up" above) otherwise transmission problems may occur. The transmission range is around 330 feet (100 meters) from the thermo-hygro transmitter to the weather station (in open space). However, this depends on the surrounding environment and interference levels. If no reception is possible despite the observation of these factors, all system units have to be reset (see "Set up" above). POSITIONING THE THERMO-HYGRO TRANSMITTER Mount in a sheltered place. The thermo-hygro transmitter can be placed onto any flat surface or wall mount using the bracket which doubles as a stand or wall mount base. POSITIONING THE WEATHER STATION The weather station provides the option of table standing or wall mounting the unit. Before wall mounting, please check that the outdoor data can be received from the desired locations. [. . . ] This handbook may contain mistakes and printing errors. The information in this handbook is regularly checked and corrections made in the next issue. We accept no liability for technical mistakes or printing errors, or their consequences. All trademarks and patents are acknowledged. FCC ID: OMO-TX45U-TH-IT (transmitter) FCC DISCLAIMER RF Exposure mobile: The internal / external antennas used for this mobile transmitter must provide a separation distance of at least 20 cm (8 inches) from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. " Statement according to FCC part 15. 19: This device complies with Part 15 of the FCC Rules. [. . . ]