User manual LA CROSSE TECHNOLOGY TX23U INSTRUCTION MANUAL

[. . . ] WS-2310-15 Wind Sensor The WS-2310-15 wind sensor is used in conjunction with the WS-2310-16 rain sensor and WS2310-25 temperature/ humidity sensor to gather and transmit information to the WS-2300 series wireless weather station. The WS-2310-15 wind sensor measures the wind speed and direction and sends the information to the WS-2310-25 temperature/ humidity sensor. This sensor then transmits all outdoor weather information from the three outdoor sensors to the display indoors. [. . . ] This radio-controlled clock does not only provide for the weather station's time and date display but also functions as the time and date source for all of this weather station's memory and history values using time and date information. Mounting the wind sensor onto a mast Wind-vane Mast Wind-fan First, check that the wind-fan and the wind-vane can rotate freely before mounting the unit. For correct and accurate readings it is important to mount the sensor so that the front (marked E) is pointing in East-West direction. The wind sensor should now be mounted using the screws provided onto a mast to allow the wind to travel around the sensor unhindered from all directions (ideal mast size should be from Ø. 63" ­ Ø1. 3"). Once the wind sensor is fixed onto the mast, connect the cable to the corresponding thermohygro sensor socket so that operating power can be supplied and data can be transmitted to the base station. Extreme temperatures, vibrations, and shock should be avoided to prevent damage to the units 2. Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents, they may mark the displays and casings 3. Do not subject the units to unnecessary heat or cold by placing them in the oven or freezer. Opening the casings invalidates the warranty. Contact La Crosse Technology for repairs. SPECIFICATIONS Wind Speed Resolution Wind Direction 0 to 111. 8 mph 0. 1 mph Graphic Resolution 22. 5 Degrees, Numerical Resolution, Letter format 32 feet Supplied from temperature/humidity sensor 2. 5" x 7. 75" x 11. 5" Cable Length Power source Dimensions LIABILITY DISCLAIMER 1. The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any consequences occurring should an inaccurate reading take place. This product is not to be used for medical purposes or for public information. The specifications of this product may change without prior notice 4. [. . . ] All trademarks and patents are acknowledged. 415 FCC DISCLAIMER This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. [. . . ]