User manual LA CROSSE TECHNOLOGY TX60U-IT

[. . . ] Note: The new measurement is reported to the computer at intervals that you select using your online account. Your online account will be updated with the new measurements based on the time interval that you select. TX60U-IT Wireless 915 MHz Temperature and Humidity Sensor www. weatherdirect. com TX60U-IT sensor measures: (A) Ambient air temperature and humidity (Channel 1) (B) Probe temperature (Channel 2): Use the included 6 Ft. detachable, waterproof temperature probe to measure water, soil, or even the conditions inside of a refrigerator or aquarium. (A) LCD Button BEGIN SET UP First you must have a Weather Direct® Gateway registered so that it can communicate with your new TX60U-IT sensor. [. . . ] When e-mail / text alerts are active on your account, settings for temperature and humidity alerts are available Note: To delete or reset the TX60U-IT sensor from your account, press and hold the button on the sensor until the LCD displays a full segment and then delete the record in your Weather Direct® account. WARNING: If you do this, you will have to re-register your device. AUTOMATIC SPREADSHEET CREATION OF MEASUREMENT LOG Once the TX60U-IT sensor is set up on your www. weatherdirect. com account and is building a measurement log, you can download the data to your computer in the form of a spreadsheet. You have the option to either: "save the file to your hard drive" or "open it directly from the website". You must have an application on your computer that supports Microsoft® Excel formatted files for this option to work. Please refer to www. weatherdirect. com for more information. PACKAGE LIST OF CONTENTS 1. · · · · · One TX60U-IT wireless temperature & humidity sensor Mounting hardware Instruction manual ADDITIONAL EQUIPMENT (NOT INCLUDED) Two fresh AAA, IEC LR03, 1. 5V Alkaline batteries A Weather Direct® Gateway PC with high speed internet to configure the TX60U-IT sensor IMPORTANT SETUP & OPERATION NOTES The TX60U-IT sensor should be placed in a dry, shaded area. Please avoid a location with direct sun, as that will cause incorrect readings. Fog and mist will not harm the TX60U-IT sensor but direct rain must be avoided. Note: Exposing the TX60U-IT sensor case to extreme humidity may temporarily disrupt data. The sensor case reads humidity, but should not be `submerged' in water. probe can be used for measuring water temperature. The TX60U-IT sensor has a wireless range of 200 feet (60. 96 m). Keep in mind that the 200 ft range equates to open air with no obstructions, and that radio waves DO NOT curve around objects. Actual transmission · BATTERY INSTALLATION 1. Remove the battery cover by sliding the cover down. Observing the correct polarity install 2 AAA, Alkaline batteries. The batteries will fit tightly (to avoid start-up problems make sure they do not spring free). Replace the battery cover by sliding upwards. Be sure battery cover is on securely. WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. [. . . ] Place the mounting bracket over the desired location. Mark the mounting surface with a pencil through the two screw holes of the bracket, . Screw the mounting bracket onto the mounting surface. Ensure that the screws are tight against the bracket. [. . . ]