User manual LA CROSSE TECHNOLOGY WS-2811BRN-IT

[. . . ] WS2811U Wireless Professional Weather Center Operations Manual Wireless Professional Weather Center Wireless ThermoHygro Wireless Rain Gauge Wireless Wind Sensor USB Transceiver with P. C. Software Revision: 7 TABLE OF CONTENTS TABLE OF CONTENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Inventory of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For example, you can set the thresholds for the outdoor temperature to +104°F (high) and 14°F (low), while enabling the high alarm and disabling the low alarm (i. e. temperatures <14°F won't trigger alarm, but temperatures >+104°F will). If the value meets the condition for high alarm or low alarm, the alarm will ring for 2 minutes and the value will blink, along with the corresponding icon ("HI AL"/ "LO AL"). Press any key to stop a ringing alarm. The high and low alarms can be switched On/Off independently, according to your needs. If at any time during the alarm setting process you would like to exit alarm setting mode, press the MIN/MAX key or wait for about 30 seconds and the display will return to normal display mode automatically. Press the ALARM key to enter ALARM mode. Subsequent presses of the ALARM key will advance to the next weather alarm section. Note: Weather alarms can also be set from the Heavy Weather Pro software. Consult the Heavy Weather Pro User's Guide for instructions. P a g e | 19 THE FOLLOWING WEATHER ALARMS CAN BE ADJUSTED IN ALARM SETTING MODE: High and Low pressure alarms High and Low indoor temperature alarms High and Low indoor humidity alarms High and Low outdoor temperature alarms High and Low outdoor humidity alarms High wind gust alarm Wind direction alarm Rainfall amount in 24 hour period alarm DEFAULT WEATHER ALARM VALUES: Low Pressure 28. 35 inHg Wind gust Wind Direction High 62. 0mph North High 30. 71 inHg Low 32F Temperature (In or Out) Rainfall in 24 hours High 1. 96 in High 104F Low 45% Relative Humidity (In or Out) PRESSURE ALARMS High 70% 1. In the normal display mode, press the ALARM key once. The high pressure alarm display will be shown. Press and hold the SET key for about 2 seconds. The pressure digit will start flashing. Press the UP ARROW key or DOWN ARROW key to set the high pressure alarm value. Hold the arrow key in to change the value faster. Press the ALARM key to confirm the setting. Press the SET key to switch the alarm on or off. The ((())) icon indicates the alarm is switched on. The Low Pressure alarm display will be shown. Press and hold the SET key for about 2 seconds. [. . . ] Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. P a g e | 33 WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1year limited warranty on this product against manufacturing defects in materials and workmanship. [. . . ]