User manual LA CROSSE TECHNOLOGY WS-6002U-A INSTRUCTION MANUAL

[. . . ] This Atomic Clock regulates the WWVB transmitter. 3 QUICK SET-UP GUIDE 1) Insert two AA batteries into the Atomic Clock. 3) If there is no WWVB reception, manually set the time and date (instructions in the Program Mode). 5) Mount the WS-6002U in a suitable location, where WWVB signals can be received. 4 DETAILED SET-UP GUIDE I) BATTERY INSTALLATION Note: To avoid start-up problems make sure that the batteries do not spring free. Battery Compartment SET Battery Cover A) ATOMIC CLOCK 1) Remove the battery cover, located on the backside of the function buttons. 2) Observe the correct polarity, and install 2 AA batteries. [. . . ] 2) Press and release the "+" button to select the year. 3) Press and release the "SET" button to confirm the year, and to set the month. 4) The default month "1" will flash. Press and release the "+" button to select the appropriate month. 5) Press and release the "SET" button to confirm the month, and to set the date. 6) The default date "1" will flash. Press and release the "+" button to select the appropriate date. 7) Press and release the "SET" button to confirm the date, and to set the weekday. 8) The default weekday "MON" (depends on selected language) will flash. Press and release the "+" button to select the appropriate weekday. 9) Press and release the "SET" button to confirm the calendar settings, and to advance to select either 12 or 24-hour time display. VII) 12/24-HOUR SETTING 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button 9 more times, until the "12" hour time display flashes in the time LCD. 2) Press and release the "+" button to toggle between 12 and 24 hour time. 3) Press and release the "SET" button to confirm the 12/24-hour time display, and to advance to select either °F or °C. Note: The "24 hour time" option is not recommended. The LCD display will not show the first digit "2". 9 VIII) SELECTING °F OR °C 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button 10 more times, until the default "°F" flashes in the time LCD. 2) Press and release the "+" button to toggle between °F and °C. 3) Press and release the "SET" button to confirm the °F or °C selection, and exit the Program Mode. FEATURES & OPERATIONS I) CHANGING DISPLAY MODE (DAY, SECONDS, AND TEMPERATURE) There are three possible display modes to view the day, seconds, and temperature. The month & date/ weekday/ indoor temperature is the default. To change the display: 1) Press and release the "+" button. [. . . ] THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. This warranty gives you specific legal rights. You may also have other rights specific to your State. Some States do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you. 14 For warranty work, technical support, or information contact: La Crosse Technology, Ltd 190 Main Street La Crescent, MN 55947 Phone: 507. 895. 7095 Fax: 507. 895. 2820 e-mail: support@lacrossetechnology. com (warranty work) sales@lacrossetechnology. com (information on other products) web: www. lacrossetechnology. com All rights reserved. [. . . ]