User manual LA CROSSE TECHNOLOGY WS-7044UG INSTRUCTION MANUAL

[. . . ] Replace the battery cover. 2. 3. 4 B. Pull up and Cover out from the slot located in the central position of the battery cover. Observing the correct polarity, install 2 AAA batteries. The batteries will fit tightly (to avoid start-up problems make sure that they do not spring free during installation). [. . . ] The Remote Temperature Transmitter makes a temperature update every 1 minute, and transmits a new temperature to the Weather Temperature Station 3 times every 10 minutes. The Weather Temperature Station also keeps a record of the Minimum and Maximum temperatures it has recorded. 13 A. VIEWING THE MINIMUM/MAXIMUM TEMPERATURES 1. Press the circular MIN/MAX button (under all LCD displays) once. An arrow will appear and point to the "MIN" that is printed in the right-hand margin. The minimum-recorded temperature will display in the OUDOOR LCD. Press the MIN/MAX a second time and the arrow will shift to point to the "MAX" that is printed in the right-hand margin. The maximum-recorded temperature is now displayed in the OUTDOOR LCD. Press the MIN/MAX a third time, and the OUTDOOR LCD returns to display the current outdoor temperature. 14 B. RESETTING THE MINIMUM/MAXIMUM TEMPERATURE 1. Press and hold the MIN/MAX button for 3 seconds. This will reset all records to the current outdoor temperature. MOUNTING Note: Extreme and sudden changes in temperature will decrease the accuracy of the Weather Temperature Station, and changes in elevation will result with inaccurate weather forecasting for the next 12 to 24 hours. These changes will require a 12 to 24 hour wait before obtaining reliable data. To achieve a true temperature reading, avoid mounting where direct sunlight can reach the Remote Temperature Transmitter. We recommend that you mount the Remote Temperature Transmitter on a Northfacing wall. The sending range is 80ft (25m)-- obstacles such as walls, concrete, and large metal objects can reduce the range. Place both units in 15 their desired location, and wait approximately 10 minutes before permanently mounting to ensure that there is proper reception. The Weather Temperature Station should display a temperature in the OUTDOOR LCD within 3 minutes of setting-up. THE REMOTE TEMPERATURE TRANSMITTER The Remote Temperature Transmitter can be mounted in two ways: · with the use of screws, or · using the adhesive tape. Remove the mounting bracket from the Remote Temperature Transmitter. Place the mounting bracket over the desired location. Through the three screw holes of the bracket, mark the mounting surface with a pencil. [. . . ] Before sending the Weather Station in for repairs, contact La Crosse Technology. The Weather Station will be repaired or replaced with the same or similar model. This warranty does not cover any defects resulting from improper use, unauthorized repairs, faulty batteries, or the Weather Stations inability to receive a signal due to any source of interference. LA CROSSE TECHNOLOGY WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS WEATHER STATION. [. . . ]