User manual LA CROSSE TECHNOLOGY WS-9013U

[. . . ] WS-9013U Wireless 433 MHz Radio-controlled Weather Station Instruction Manual Topic Inventory of Contents/Additional Equipment About WWVB Quick Set-Up Guide Detailed Set-Up Guide Battery Installation Program Mode Programming Sequence Function Keys 12/24 Hour Time Setting Time Zone Setting Daylight Saving Time Setting Time Setting (WWVB & Manual) Setting Day, Date and Year Selecting °F or °C Setting the LCD Contrast Features Indoor Temperature Outdoor Temperatures Minimum & Maximum Records (Indoor, Outdoor & Resetting) Additional Remote Temperature Sensor Units (Set-Up, Viewing & Operation) Mounting Troubleshooting Maintenance & Care Specifications Warranty Information Page 3 4 5 6-7 7 8 8 8-9 9-10 10-11 11-12 12 13 14 14 15-16 16-17 18-19 20 20 21 22-23 2 Table Of Contents INVENTORY OF CONTENTS 1. One TX6U remote temperature sensor with mounting bracket (Figure 2). Three each, ½" Philips screws. Instruction Manual and Warranty Card. Figure 2 Time LCD Date LCD Indoor LCD Outdoor LCD Mounting Bracket Figure 1 ADDITIONAL EQUIPMENT (not included) 1. [. . . ] Press and release the "SET" button to confirm and to enter the year setting mode. The default-year will be flashing, press and release the "CH" to select the appropriate year. Press and release the "SET" button to confirm and to advance to the °F or °C setting mode. Press and hold the "SET" button for 3 seconds, or until "12h" or "24h" flashes in the DATE LCD. Press and release the "SET" button 9 times to reach the °F or °C setting mode. "MIN" appears in the upper portion of the flashing INDOOR LCD indicating that the minimum temperature and the time and date of occurrence are displayed. The minimum records will display for 20 seconds. Press the "IN" button again (once while "MIN" is still displayed, twice otherwise). "MAX" appears in the upper portion of the flashing INDOOR LCD indicating that the maximum temperature and the time and date of occurrence are displayed. While "MAX" is still displayed press the "IN" button again to return to the current data display. By waiting 20 seconds during either the minimum or the maximum readings the unit will automatically return to current data readings. 2. 3. B. VIEWING THE OUTDOOR TEMPERATURE RECORDS 1. "MIN" appears in the upper portion of the flashing OUTDOOR LCD, indicating that the minimum temperature and the time and date of occurrence are displayed. The minimum records will display for 20 seconds. Press the "OUT" button again (once while "MIN" is still displayed, twice otherwise). "MAX" appears in the upper portion of the flashing OUTDOOR LCD, indicating that the maximum temperature and the time and date of occurrence are displayed. While "MAX" is still displayed press the "OUT" button again to return to the current data display. By waiting 20 seconds during either the minimum or the maximum readings the unit will automatically return to current data readings. 2. 3. 15 C. RESETTING THE MIMIMUM AND MAXIMUM RECORDS 1. All the indoor records (minimum and maximum) will be reset after the "IN" button is pressed and held for 5 seconds. All the outdoor records (minimum and maximum) will be reset after the "OUT" button is pressed and held for 5 seconds. IV. ADDING OUTDOOR REMOTE CONTROL SENDERS (OPTIONAL) The WS-9013U is able to receive signals from 3 different remote temperature sensors. [. . . ] La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty. [. . . ]