User manual LA CROSSE TECHNOLOGY WS8418

[. . . ] MOONPHASE WALL CLOCK Instruction Manual « Instant Transmission+» is the up and coming state-of-the-art new wireless transmission technology, exclusively designed and developed by LA CROSSE TECHNOLOGY. "IT +" offers you an immediate update of all your outdoor data measured from the transmitters: follow your climatic variations in real-time! FEATURES: MOONPHASE WALL CLOCK: Hanging holes LCD1 display LCD2 display Function keys Battery cover Foldable stand · · · · DCF-77 Radio controlled time with manual setting option 12/24 hour time display Time display: hour, minute, second Alarm setting with snooze function 14 · · · · · · · · · Calendar display Weekday display (4 languages to choose from: German, English, French, and Spanish) Display 12 Moon phases throughout the year Time zone setting ºC or ºF temperature display selectable Indoor temperature display Outdoor temperature display via 868MHz transmission Low battery indicator Wall mount or freestanding OUTDOOR TEMPERATURE TRANSMITTER: · · · Remote transmission of outdoor temperature to Weather Station by 868 MHz Wall mounting case Mounting at a sheltered place. Avoid direct rain and sunshine TO INSTALL AND REPLACE BATTERIES IN THE MOONPHASE WALL CLOCK The Moonphase wall clock uses 2 x AA, IEC LR6, 1. 5V batteries. To install and replace the batteries, please follow the steps below: 1. [. . . ] Press and release the SET key to move to the "Year Setting". YEAR SETTING The year can be selected sequentially from 2000 to 2049 and will then start over again (default setting 2001). Only the last 2 digits of the year will be visible on LCD2 . The year digits will start flashing on LCD2. Select the desired year by use of the + key. Press and release the SET key to switch to the "Month Setting". 19 MONTH SETTING 1. The month digits on LCD2 will start flashing (Default setting 1). Set the desired month by use of the + key. Press and release the SET key to move to the mode "Date Setting". DAY SETTING 1. The digits for the day will start flashing on LCD2 (Default setting 1). Set the desired day by use of the + key. Note: The data can only be set in conjunction with the selected month. For example, it is not possible to set the data 30 if the months of February is selected. Press and release the SET key to enter the "Weekday Setting". 2. WEEKDAY SETTING 1. The weekday symbols will be displayed on LCD2 in the pre-set language and flashing. Set the desired weekday by use of the + key. Press and release the SET key to enter the mode "12/24 Hours Time Display Setting". The "12h" or "24h" will start flashing in LCD1 (Default setting 24h). Select the desired time display mode by use of the + key. Press and release the SET key to enter the "ºC/ºF Temperature Setting". The characters "° or "° will start flashing on LCD1 (Default setting ° B y use of the C" F" C). + key select "° for temperature display in degrees Celsius or "° for degrees C" F" Fahrenheit. Press and release the SET key to exit the setting mode and switch back to the normal display mode. 12/24 HOURS TIME DISPLAY SETTING ° OR ° TEMPERATURE SETTING C F 2. EXIT THE MANUAL SETTING MODES · · To return to the normal display mode from anywhere in manual setting mode simply press the SNZ key anytime. [. . . ] Before securing in place, please ensure that the Temperature Station can receive the 868MHz signal from the temperature transmitter at the positions that you wish to place them. 24 CARE AND MAINTENANCE: · · · · · · Extreme temperatures, vibrations and shocks should be avoided as these may cause damage to the unit and give inaccurate forecasts and readings. When cleaning the display and casings, use a soft damp cloth only. Do not use solvents or scouring agents as they may mark the LCD and casings. Furthermore, fix all parts in place where the units are adequately protected against moisture and rain. [. . . ]