User manual LA CROSSE TECHNOLOGY WS9162

[. . . ] After the batteries are inserted, the Temperature Station will start receiving data signal from the transmitter. The outdoor temperature should be displayed on the Temperature Station. Also, the signal reception icon will be displayed. If this does not happen after 1 minute, the batteries will need to be removed from both units and reset from step 1. [. . . ] Replace the battery holder to the unit. 29 Note: In the event of changing batteries in any of the units, all units need to be reset by following the setup procedures. This is because a random security code is assigned by the transmitter at start-up and this code must be received and stored by the Temperature Station in the first few minutes of power supplying. BATTERY CHANGE: It is recommended to replace the batteries in all units every 12 months to ensure optimum accuracy of these units. Please participate in the preservation of the environment. Return used batteries to an authorised depot. 30 FUNCTION KEYS: Temperature Station: The Temperature Station has only four easy to use function keys. Set Key Channel key + key Min/max key Set key (Setting) · Press and hold for about 3 seconds to enter the Manual setting mode. This key provides the following functions: 12/24 hour display, Manual time setting 31 min/max key (Min/ Max temperature) · Used to toggle between the minimum and maximum recorded readings of indoor & outdoor temperature. · Press and hold to reset minimum and maximum record when min or max record is shown. + key (Plus) · To make adjustment for manual setting. Ch key (Channel) · To toggle between the Outdoor transmitters 1, 2 and 3 (if more than 1 transmitter is used) · Before pressing the min/max key, user should press this key first in order to view the minimum and maximum indoor temperature, minimum and maximum outdoor temperature, and the current value in the next channel. 32 LCD Screen and settings: Time *When the signal is successfully received by the temperature station, this icon will be switched on. (If not successful, the icon will not be shown in LCD) So the user can easily see whether the last reception was successful (icon on) or not (icon off). On the other hand, the short blinking of the icon shows that a reception is being done now. For better distinctness the LCD screen is split into 3 sections displaying the information for time, indoor temperature, and outdoor temperature. Indoor Temperature in ° C Outdoor Temperature in ° C Outdoor Reception Signal icon* Receiver Low battery indicator Transmitter Low battery indicator 33 Transmitter Low battery indicator Section 1 - TIME · Display of time. Section 2 - INDOOR TEMPERATURE · Display of indoor temperature Section 3 - OUTDOOR TEMPERATURE · Display of the outdoor temperature. MANUAL SETTING: 12 / 24- HOUR TIME DISPLAY SETTING AND TEMPERATURE UNIT (°C/°F) SETTING °° User may choose to display the time in 12-hour or 24-hour mode: Note: When the time display is set as 12-hour mode, the temperature unit will be fixed to °F; when the time mode is in 24-hour, the temperature unit will be fixed to °C. 34 1. 3. In normal display mode, press and hold the set key for about 3 seconds. The "12h" or "24h" digit will be flashing. Press the + key to set the desired time display mode. Press shortly the set key to advance to the MANUAL TIME SETTING. MANUAL TIME SETTING User shall manually set the time of Temperature Station by the following steps: 1. The hour digit of the time display will be flashing. Press the + key to adjust the hour (Press and hold to allow fast advancing). Press set key to confirm and go to the minute setting. Press the + key to adjust the minute (Press and hold to allow fast advancing). Press set key once more to return to normal display. VIEWING THE MINIMUM AND MAXIMUM READINGS: User may view the minimum and maximum indoor temperature, minimum and maximum outdoor temperature data records by the following steps: 35 1. Press the min/max key once to view the minimum indoor temperature, minimum outdoor temperature. 2. Minimum icon Press the min/max key once more to view the maximum indoor temperature, maximum outdoor temperature. Maximum icon 36 VIEWING THE MINIMUM AND MAXIMUM READINGS OF THE NEXT CHANNEL: User can choose to view the minimum and maximum indoor temperature, minimum and maximum outdoor temperature of the other channels. To view the readings of the next channel, user should make the following steps: 1. [. . . ] User shall take an active part in the reuse, recycling and recovery of the electrical and electronic waste. The unrestricted disposal of electronic waste may do harm on public health and the quality of environment. As stated on the gift box and labeled on the product, reading the "User manual" is highly recommended for the benefit of the user. This product must however not be thrown in general rubbish collection points. [. . . ]